Quoizel TFIK9471VA User Manual

6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com

ToolsRequired: none Bulb Recommended: EstimatedAssembly Time: Preparation:

present.Ifany parts are missingordamaged, do not attempttoassemble, install, or operatethefixture. Contact customer serviceforreplacement parts.

(1)MediumBase 150W Maximum,Alternate bulb (1) 42WCFL

20-30minutes

Identifyandinspect all parts beforebeginninginstallation. Check package contentlistand diagrams below tobesure all parts are

Assembly Instruction Sheet #IS-TFIK9471VA

For Style TFIK9471VA

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Care of Tiffany Style Shade

A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.

For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.

If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or mineral oil applied directly to oxidized areas and the soldered area will return to like new.

A. Thread Upper Rod, Rods and Base

together. Hand tighten until snug.

B. Pull the cord from the Base as you

assembled the parts together to remove the excess cord between parts.

C. Place Shade, Flat Washer and Steel

Collar over Socket. Secure by threading Socket Collar onto Socket. Hand tighten until snug.

D. This fixture uses standard bulb with

medium base . Maximum 150 watts. Insert bulb and screw snugly into place.

Your fixture is now assembled and ready to use. Enjoy!

Bulb

Steel

Collar

Socket Collar x1

Flat Washer x1

Shade x1

Socket

Dimmer

Upper Rod x1

TFIK9471VA

FINISH: VALIANT BRONZE

9”

16” SQ.

2014 QuoizelInc.

71”

Rod

Rod x2

11” SQ.

PART NUMBER

Base

Supply Wire

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

(1) 150W Medium

Base bulb

(not provided)

1of1

NO.

19471VATFIK

M1834RG

G2085SH

REPLACEMENT PART

BASE

RETAINER RING

SHADE

REQ.

July2014