Quoizel TFBL9360IB User Manual
Assembly Instruction Sheet #IS-TFBL9360IB
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
,.
For Style TFBL9360IB
ToolsRequired: None.
BulbRecommended:
EstimatedAssembly Time:
Preparation:
belowtobesureallpartsarepresent.Ifanypartsaremissingordamaged,donotattempttoassemble,install,or
operatethefixture.Contactcustomerserviceforreplacementparts.
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagrams
(2)MediumBase100WMaximum,Alternate bulb (2) 23W CFL
10-15minute
Package Contents
Socket
B
Assembly
x1
Rod
C
x1
Threaded
Rod
D
x2
Base
E
x1
A
Shade
x1
F
G
H
Finial
x1
Flat
Washer
x1
Stem
x1
STEP 1 Install Rods and Socket
A. Thread the SocketAssembly (B), the
B.PullthecordfromtheBase(E)asyou
-
Assembly
(C) and the
Rod Threaded Rods,the (D)
Base ( ) together as shown. Hand
E
tighten until snug.
assemble the parts together to remove
the excess cord between parts.
STEP 2 Install Stem-
A. Thread Stem (H) into the Hex Coupling
on the top of (B).
Hand tighten until snug.
STEP 3 Install Shade-
Place the Flat Washer (G)
A. and the
Shade (A) Stem
by thread the Finial (F) onto the
(H). Hand tighten until snug.
Socket Assembly
over the (H). Secure
Stem
Figure 1
B
C
D
D
E
Cord
H
Hex Coupling
B
Figure 2
F
A
G
H
2014 Quoizel Inc.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of2
Figure 3
March2014
STEP 4 Install Bulb-
A. This fixture uses standard bulb with medium base . Maximum 100
watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Bulb
Figure 3
TFBL9360IB
FINISH: IMPERIAL BRONZE
18” Dia.
8.5”
2
58.5”
(2) 100W
Base
(Not Supplied)
PART NUMBER
NO.
19360IBTFBL
1
2
G3799SH
2014 Quoizel Inc.
Medium
Bulbs
1
11” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE FLOOR LAMP IMPERIAL BRONZE
SHADE TIFFANY 18"D x 8"H
REQ.
1
1
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2of2
March2014
Loading...