6 CORP ORATE PARK WAY
GOO SE CRE EK S C 29 445
www qu oiz el com
..
, .
Assembly Instruction Sheet #IS-TFAS344VA
For Style TFAS344VA
Tools Requ ired: Flat he ad screwdr iver, Ph illips screwdriver, pliers, wire cutters, wire
Quoizel, Inc.
strippers, electrical tape, safety glasses.
6 Corporate Parkway
Goose Creek, SC
29445
Bulb Recommended: (3) Medium Base 1 00 W Maximum
Estimated As se mb ly Ti me : 20 -30 minutes
Preparation: Identify a nd inspect all parts befo re beginning installation. Check pa ckag e
Customer Service
Phone 631.273.2700
Fax631.231.7102
content list and diagrams below to be sure all parts are present. If any par ts are missing
or damaged, do not attempt to assemble, install, or operate the fixture. C on tact custome r
service for replace mentparts.
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in do ubt.
These instructio ns are provided for your safety. It is very import an t yo u read them completely before installi ng
the fixture. We strongly recommend th at a l icensed, pro fess ional electrician perform the in stallation.
Disconnect fixtu re from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
A
B
PartDescription
ACr os sbar
B
C
D
E
FQu ic k Li nk
G
H
K
L
M
N
OBr acket
Nipple
Lock Washer
He x Nu t
Mounting Ball
Fixture Ch ain
Ce il in g Ca no py
Socket Asse mbly
I
Sm all Tiffany Panel
J
Small Wing Nut
Small Flat Washer
Lock Ball
Big Tiffany Panel
Quantity
1 pc.
1 pc.
1 pc.
1 pc.
1 pc.
4 pcs.
2 pcs.
1 pc.
1 pc.
2 pcs.
8 pcs.
8 pcs.
4 pcs.
2 pcs.
1 pc.
C
D
I
E
F
G
J
K
L
M
O
H
N
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of6
September2013
Page 2
TFAS344VA
FINISH: VALIANT BRONZE
10” x 4.5”
1
2
1”
Overall Heig ht 79.5”
(Includes 48” Chain)
31.5”
12”
44”
44”
19”
(3) 100W Medium
Base Bulbs
(Not Supplied)
NO.
PART NUMBERREPLACEMENT PART DESCRIPTIONREQ.
1
M1195CHVACHAIN VALIANT BRONZE 3.8MM X 4'2
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
2G3 699SHTIFFANY SHADE 44"L1
2of6
Page 3
6 CORP ORATE PARK WAY
GOO SE CRE EK S C 29 445
www qu oiz el com
..
, .
Assembly Instruction Sheet #IS-TFAS344VA
For Style TFAS344VA
STEP 1Install Tiffany Panels-
TWO PEOPLE ARE RECOMMENDED FOR THIS STEP.
A. Place the Bracket (O) onto a f lat working surface.
Attach the Tiffany Panels (J/N) over the Bolts on the
Bracket (O) and match the holes on the Small Tiffany
Panels (J) over the Bolts on the side of the Big Tiffany
Panels (N).
B. Pass the Small Flat Washers (L) over the Bolts on the
Bracket (O) and thread the Small Wing Nut (K) onto the
Bolts to secure the Tiffany Panels ( J/N). Hand tighten
until snug.
C. Secure the Small Tiffan y Pa ne l (J) to the Big Tiffany
Panel (N) by threading the Lock Balls (M) onto the
Bolts. Hand tighten until snug.
STEP 2Install Sha de-
A. Remove the Lock Washer and the Big Wing Nut f rom
the Socket Assembly (I).
B. Pass the Holes on the Br acket (O) over the Bolts on the
Socket Assembly (I). Secure by threading the Lock
Washe r and the Big Wing Nut onto the Bolts. Hand
tighten until snug.
Big Tiffany
Panel
Socket
Assembly
Bracket
Lock Ball
Bolt
Figure 1
Bolt
Bracket
Big Wing Nut
Small
Wing Nut
Small Flat
Washe r
Small Tiffany
Panel
Lock Washer
Bolt
Hole
STEP 3 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box wi th outlet
box screws (not supplied). Tighten until snug.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
or visit us on-line at www.quoizel.com
3of6
Figure 2
Figure 3
Mounting
Hole
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
September2013
Page 4
6 CORP ORATE PARK WAY
GOO SE CRE EK S C 29 445
www qu oiz el com
..
, .
Assembly Instruction Sheet #IS-TFAS344VA
For Style TFAS344VA
STEP 4Attach Nipple to Crossbar-
A. Thread one Hex N ut ( D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
STEP 5Attach Lanyard-
Crossbar
Lock Washer
Hex Nut
Nipple
Figure 4
A. The purp ose of the lanyard i s to provi de the install er a
means to support the fixture from the junction box while
connecting the electrical wire s. This enables the fixture
to hang from the junction box and your hands are free to
make the wire connections.
B. Turn the Button Stop so it ma y be inserte d in to the
crossbar slot. Make sure the Button Stop is completely
inside the crossbar. Slowly release the fixture to make
sure it is supported by the Button Stop. Proceed to the
wiring steps. Once you are complete with the wiring
there is nothing to do with Lanyard. Th e La nyard wi ll
push into the junction box when the fixture is placed for
final mounting.
STEP 6Install Ceiling Canopy-
A. Place the Ceiling Canopy (H) over the Nipple (B) a nd
secure with the Mounting Ball (E). Hand tighten until
snug.
Crossbar
Ceiling
Canopy
Crossbar
Ceiling Canopy
Lanyard
Nipple
Slot
Button
Stop
Figure 5
Figure 6
Mounting Ball
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of6
September2013
Page 5
6 CORP ORATE PARK WAY
GOO SE CRE EK S C 29 445
www qu oiz el com
..
, .
Assembly Instruction Sheet #IS-TFAS344VA
For Style TFAS344VA
STEP 7 - Attach Fixtur e Chain to Ceilin g Loop
and Fixture Loop
Ceiling Loop
A. Adjust the Fixture Chain (G) to your desired length by
removing the links if needed. You may need to use p li er
to open the chain links. If so, put a cloth over the chain
to protect the finish from the pliers.
B. Connect one end of the Fixture Cha in (G) onto the
Ceiling Loop on the bottom of the Ceiling Canopy (H)
with one Quick Link (F) and then attach the other end of
the Fixture Chain (G) onto the Fixture Loop on the top of
the Socket Assembly (I) with another Quick Link (F).
STEP 8Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up t hr ough the
Fixture Chain (G) alternating links. Push the wires up
through the Ceiling Loop (E) into the outlet box.
Quick Link
Fixture Loop
Quick Link
Fixture Chain
Supply Wires
with Ground Wire
Socket Assembly
Figure 7
Ceiling Loop
Fixture Chain
Supply Wire
and Ground Wire
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of6
Figure 8
September2013
Page 6
6 CORP ORATE PARK WAY
GOO SE CRE EK S C 29 445
www qu oiz el com
..
, .
Assembly Instruction Sheet #IS-TFAS344VA
For Style TFAS344VA
STEP 9 - Make Wire Connections
Supply Wire and
Ground Wire from
A. Un-thread the Mounting Ball (E) and slide Ceiling Canopy
Outlet Box
(H) down.
B. Push all slack fixture wire through Ceiling Loop into Outlet
Box. Trim excess fixture wire leaving a minimum of 6 i nch.
Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connec tions.
(Connectors are not included with fixture.) Stri p and prepare
wire ends according to instruction s supplied with connectors .
D. Connect White Supply Wire from the Outlet Box to Ribbed
side Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Smooth side Wire from fixture.
F. Co nn ect Ground Wire from the Outlet Box to Ground Wire
from fixture .
G. Twist c onnectors until wi res are ti gh tly joined tog ether.
H. Wrap e ac h co nn ec ti on w ith ap pr oved e le ctrical tape and
carefully stuff all the connected wires into the Outlet Box.
I. Re-attach the Ceiling Canopy (H) as shown in Step 6.
Wh ite w ire from supplyRibb ed side wir e f ro m fixtu re
Supply Wire
and Ground
Wire
Ceiling
Canopy
Mounting
Ball
Bl ac k wir e f rom supply
(o r R ed )
Gr ou nd wire from sup pl yGr ou nd wire from fix tu re
Sm ooth side wire f ro m fix ture
Figure 10
STEP 10Install Bulb-
A. This f ixture uses standard bulb wi th standard screw base .
Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your f ixtu re is no w assembled and ready to use.
Enjoy!
Figure 9
Socket
Socket
Figure 11
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of6
September2013
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.