BulbRecommended: (2)Medium Base 60WMaximum
EstimatedAssemblyTime:30-45 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
A
Part
ACrossbar
B
C
D
E
F
G
H
I
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Flat Washer
Finial
Center Stem
Socket Assembly
ShadeJ
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
B
C
D
E
F
G
J
I
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
H
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of5
October2011
Page 2
TFAN1714RS
FINISH: RUSSET
5" Dia.
2"
2
12.5"
6.5"
1
16" Dia.
(2)60W A19
Medium Base Bulbs
(Not Supplied)
PART NUMBER
NO.
1
2
M2260FIFINIAL .5"SQ X 1"H
G2922SH
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
SHADE TIFFANY 16"D
REPLACEMENT PART DESCRIPTION
2of5
REQ.
1
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS- TFAN1714RS
For Style TFAN1714RS
STEP 1 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy of the Socket Assembly (I).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
Mounting Screw
Lock Washer
Ceiling
Canopy
Crossbar
Hex Nut
STEP 2 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Mounting
Hole
Figure 1
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
Figure 2
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of5
October2011
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS- TFAN1714RS
For Style TFAN1714RS
STEP 3Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supplyWhite wire from fixture
Figure 3
Black wire from supply
(or Red)
Ground wire from supplyGround wire from fixture
Black wire from fixture
Figure 4
STEP 4 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy on the Socket Assembly (I)
over the Mounting Screws (B) and secure with Mounting
Balls (E). Hand tighten until snug.
Ceiling Canopy
Figure 5
Mounting Screw
Mounting
Ball
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of5
October2011
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS- TFAN1714RS
For Style TFAN1714RS
STEP 5Install Center Stem-
A. Thread the no beaded end of the Center Stem (H) into
the Coupling underside of the Socket Cluster. Hand
tighten until snug.
Socket Cluster
Coupling
Center Stem
Figure 6
STEP 6Install Shade and Finial-
A. Pass the Flat Washer (F) and the Shade (J) over the end
of the Center Stem (H) in turn. Secure by threading the
Finial (G) onto the Center Stem (H). Hand tighten until
snug.
STEP 7Install Bulb-
Figure 7
Center Stem
Flat Washer
Shade
Finial
A. This fixture uses standard bulbs with medium screw
bases. Maximum 60 watts.
B. Insert bulb and screw snugly into place.
Your fixture semi-flush lamp is now assembled and ready
to use. Enjoy!
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 QuoizelInc.
or visit us on-line at www.quoizel.com
5of5
Bulb
Socket
Figure 8
October2011
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.