Quoizel TF9406VB User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
ToolsRequired: None.
Bulb Recommended:
EstimatedAssembly Time:
Preparation:
present.Ifany parts aremissingor damaged, donotattempt to assemble,install,or operate thefixture.Contact customer serviceforreplacement
parts.
,.
(2)MediumBase 100W Maximum,Alternate bulb (2)23WCFL
20-30minutes
Identifyandinspect all partsbeforebeginning installation. Checkpackagecontent list anddiagramsbelow to besureall parts are
Assembly Instruction Sheet #IS-TF9406VB
For Style TF9406VB
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
A. Thread SocketAssembly, Rod,
Rod with Nipple and Base
together as shown. Hand tighten
until snug.
B. Pull the cord from the Base as
you assemble the parts together
to remove the excess cord
between parts.
C. Thread have hex nut end of
Nipple with Hex Nut into Hex
Coupling on the top of Socket
Assembly. By using pliers,
thread the hex nut against the
hex coupling and hand tighten
until snug.
D. Place Spacer Tube and Check
Ring over the Nipple. Secure by
thread Small Knurled Nut onto
the Nipple, hand tighten until
snug.
E. Thread Big Knurled Nut onto
Nipple and adjust it to proper
location for rest components.
Place Flat Washer and Shade
over the Nipple. Secure by
threading Finial onto the Nipple,
hand tighten until snug.
F. This fixture uses standard bulb
with medium base . Maximum
100 watts. Insert bulb and screw
snugly into place.
Your fixture is now assembled
and ready to use. Enjoy!
Knurled Nut
Big
x1
Check Ring
x1
Nipple with
Hex Nut
x1
Rod
x1
Rod with
Nipple
x1
Finial
x1
Shade
x1
Flat Washer
x1
Small
Knurled Nut
x1
Spacer
Tube
x1
Socket
Assembly
x1
TF9406VB
FINISH: VINTAGE BRONZE
NOTE: ALL DIMENSIONS
ARE ROUNDED UP TO
THE NEAREST 1/2"
3
2
1
17” SQ.
8.5”
62”
10.5” SQ.
2014 Quoizel Inc.
PART NUMBER
NO.
1
Base
x1
Cord
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
(2) 100W
(Not Supplied)
1of1
Base
Medium
Bulbs
19406VBT
M1282FIM
2
3
G6013SH SHADE
REPLACEMENT PART
BASE
FINIAL
REQ.
1
1
1
July2014
Loading...