Quoizel TF9398VB User Manual

6 CORPORATE PARKWAY GOOSE CREEK SC 29445 www quoizel com

ToolsRequired: Flatheadscrewdriver,Phillipsscrewdriver, pliers,wirecutters, wire strippers,electricaltape, safety glasses. BulbRecommended: EstimatedAssembly Time: Preparation:

present.Ifany parts aremissingor damaged, donotattempt to assemble,install,or operate thefixture.Contact customer serviceforreplacement parts.

(1)MediumBase 150W Maximum,Alternate bulb (1)42WCFL

20-30minutes

Identifyandinspect all partsbeforebeginning installation. Checkpackagecontent list anddiagramsbelow to besureall parts are

Assembly Instruction Sheet #IS-TF9398VB

For Style TF9398VB

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Care of Tiffany Style Shade

A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.

For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.

If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or mineral oil applied directly to oxidized areas and the soldered area will return to like new.

STEP 1 Install Nipple with HEX

A. Thread the Socket Assembly ,

B. Pull the cord from the Base as

C. Place the Shade over the

D. This fixture uses standard bulb

Nut, Shade and Bulb

the , the

Rod Threaded Rods

and the Base together as shown. Hand tighten until snug.

you assemble the parts together to remove the excess cord between parts.

Socket, secure by threading Socket Collar onto the Socket, hand tighten until sung.

with medium base . Maximum 150 watts. Insert bulb and screw snugly into place.

Your fixture is now assembled and ready to use. Enjoy!

Bulb (not included)

Rod

Socket Collar x1

Shade x1

Socket

Socket Assembly x1

Threaded Rod x2

TF9398VB

FINISH: VINTAGE BRONZE

16.5” Dia.

6”

68”

2014 Quoizel Inc.

Base

Figure 1

Thank you for purchasingaQuoizelproduct.

Need assistance with partsorassembly?CallQuoizel customer service at 1-631-273-2700

or visit us on-lineatwww.quoizel.com

(1) 150W

(Not Supplied)

NO.

1of1

Medium

Base

Bulbs

PART NUMBER

19398VBT

G6598SH

NOTE: ALL DIMENSIONS ARE ROUNDED

UP TO THE NEAREST 1/2"

REPLACEMENT PART DESCRIPTION

BASE VINTAGE BRONZE TORCHIER

SHADE TIFFANY 16"D TF9398VB

10”Sq.

REQ.

April2014