Quoizel TF879T User Manual
Assembly Instruction Sheet #IS-TF879T
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
,.
For Style TF879T
ToolsRequired: None.
BulbRecommended:
EstimatedAssembly Time:
Preparation:
belowto be sure allparts are present. Ifany parts are missingor damaged, do notattempt to assemble, install,or
operatethe fixture. Contact customerservice for replacement parts.
Identifyand inspect all partsbefore beginning installation. Checkpackage content list anddiagrams
(2)Medium Base 75W Maximum,Alternate bulb (2)19W CFL
10-15minutes
Package Contents
Finial
A
x1
Flat
C
Washer
x1
Big Knurled Nut
D
x1
Small Knurled Nut
E
x1
Check Ring
F
x1
Nipple with
Hex Nut
G
x1
Spacer
H
x1
B
Shade
x1
J
K
L
M
N
Socket
I
Assembly
x1
Column
x1
Base
x1
Lock
Washer
x1
Spring
Washer
x1
Wingnut
x1
STEP 1 Install Socket Assembly and Base together-
A. Pass the Base (K), Lock Washer (L) and Spring Washer (M) through
the Nipple on the Column (J), secure by threading Wingnut (N) onto
the Nipple. Hand tighten until sung.
B. Thread the SocketAssembly (I) onto the Column (J), hand tighten
until sung.
I
J
K
L
M
N
Figure 1
2014 Quoizel Inc.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of2
March2014
STEP 2 - Assemble Shade
A
STEP 3 - Install Bulb
A. Thread the hex nut end of
Nipple with Hex Nut (G) into
the hex coupling, hand tighten
until sung.
B. Place Spacer (H) and Check
Ring (F) over the Nipple with
Hex Nut (G), secure by
threading the Small Knurled
Nut (E) onto the nipple. Hand
tighten until sung.
C. Thread the Big Knurled Nut
(D) onto the Nipple, hand
tighten until snug.
D. Place the Flat Washer (C) and
the Shade (B) over the Nipple
(G). Secure by threading the
Finial (A) onto the Nipple.
Hand tighten until snug.
TF879T
FINISH: VINTAGE BRONZE
C
E
G
Hex
Coupling
7.5”
F
D
H
B
Figure 2
A. This fixture uses standard
bulb with medium base .
Maximum 75 watts.
B. Insert bulb and screw
snugly into place.
Your fixture is now
assembled and ready to
use. Enjoy!
Bulb
Figure 3
16” Dia.
2
3
(2) 75W
Base
(Not Supplied)
PART NUMBER
NO.
1879TTF
1
M2364FIVB
2
3
G2525SH
Medium
Bulbs
22.5”
7.5” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE FOR TF879T
FINIAL 0.75"D X 1.40"HVINTAGE BRONZE
SHADE TIFFANY 16"D FOR TF879T
1
REQ.
1
1
1
2014 Quoizel Inc.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
2of2
March2014
Loading...