Quoizel TF878UVB User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
ToolsRequired: Flatheadscrewdriver,Phillipsscrewdriver, pliers,wirecutters, wire strippers,electricaltape, safety glasses.
BulbRecommended:
EstimatedAssembly Time:
Preparation:
present.Ifany parts aremissingor damaged, donotattempt to assemble,install,or operate thefixture.Contact customer serviceforreplacement
parts.
,.
(1)MediumBase 150W Maximum,Alternate bulb (1)42WCFL
20-30minutes
Identifyandinspect all partsbeforebeginning installation. Checkpackagecontent list anddiagramsbelow to besureall parts are
Assembly Instruction Sheet #IS-TF878UVB
For Style TF878UVB
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
STEP 1 Install Nipple with HEX
A. Thread the Socket Assembly ,
B. Pull the cord from the Base as
C. Place the Shade and the
D. This fixture uses standard bulb
-
Nut, Shade and Bulb
the , the
Rod Threaded Rods
and the Base together as
shown. Hand tighten until snug.
you assemble the parts together
to remove the excess cord
between parts.
over the Socket, secure
Collar
by threading Socket Collar onto
the Socket, hand tighten until
sung.
with medium base . Maximum
150 watts. Insert bulb and screw
snugly into place.
Your fixture is now assembled
Steel
Rod
x1
Bulb (not
included)
Steel
Collar
X1
Socket
Collar
x1
Shade
x1
Socket
Socket
Assembly
x1
Threaded
Rod
x2
TF878UVB
2
70”
14” Dia.
6”
2014 Quoizel Inc.
1
Base
x1
Figure 1
Thank you for purchasingaQuoizelproduct.
Need assistance with partsorassembly?CallQuoizel customer service at 1-631-273-2700
or visit us on-lineatwww.quoizel.com
(1) 150W
(Not Supplied)
NO.
1
2
1of1
Medium
Base
Bulbs
PART NUMBER
1878UVBTF
G2591SH
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE VINTAGE BRONZE TF878UVB
SHADE TIFFANY TF878UVB 14"D
10.5” Dia.
REQ.
1
1
April2014
Loading...