Quoizel TF6821VB User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS-TF6821
STYLE NUMBER: TF6821VB
PACKAGE CONTENTS
PART
A
B
C
D
E
F
G
H
I
J
K
L
DESCRIPTION
Socket Assembly
Center Column
Base
Nipple
Flat Washer
Lock Washer
Thumb Nut
Finial
Shade
Nipple with Knurled Nuts
Check Ring
Spacer Tube
QUANTITY
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
ISSUED 09-2010 REVISED 2012-06-25
H
A
I
J
B
C
D
E
F
K
L
G
CAUTIONS
● These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 20 - 30 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers and (2) 75W A19
medium base bulbs.
1OF2
INSTALLATION INSTRUCTIONS
STEP 1:
a. Thread the Socket Assembly onto the top end of the
Center Column and hand-tighten until snug.
b. Place the Nipple through the Base, screw into the
bottom end of the Center Column. Tighten until snug.
c. Place the Flat Washer and the Lock Washer over the
end of the Nipple. Secure by threading the Thumb Nut
onto the Nipple. Hand-tighten until snug.
Socket
Assembly
Center Column
Base
Flat Washer
Lock Washer
Thumb Nut
STYLE NUMBER: TF6821VB
Nipple
Supply Wire
STEP 2:
a. Remove Knurled Nuts from the Nipple with Knurled
Nuts.
b. Screw the Hex Nut end of the Nipple into the Hex
Coupling on the top center of the Socket Assembly. By
using pliers, thread the Hex Nut against the Hex
Coupling and hand tighten until snug.
c. Place the Spacer Tube and the Check Ring over the
Nipple. Secure them by threading small Knurled Nut
back onto the Nipple. Hand-tighten until snug.
d. Thread the big Knurled Nut onto the top end of the
Nipple. Adjust it to proper location for the Shade and
Finial.
e. Place the Shade over the top end of the Nipple and
secure with the Finial. Hand-tighten until snug.
Finial
Shade
Check Ring
Spacer Tube
Nipple with
Knurled Nuts
Hex Nut
Hex Coupling
Socket
Assembly
STEP 3:
a. Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
Your assembly is completed now. Retain this sheet for future reference.
2OF2
Loading...