Quoizel TF6660BB User Manual

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

..

,.

Assembly Instruction Sheet #IS-TF6660BB

For Style TF6660BB

ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters, wirestrippers,electrical tape, safety glasses.
Bulb Recommended:
EstimatedAssembly Time:
Preparation:

Identifyandinspect all parts beforebeginninginstallation. Check package contentlistand diagrams below tobesure all parts are

(2)MediumBase 75W Maximum,Alternate bulb (2) 19WCFL

20-30minutes

present.Ifany parts are missingordamaged, do not attempttoassemble, install, or operatethefixture. Contact customer serviceforreplacement
parts.

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.

Care of Tiffany Style Shade

A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.

For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.

If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.

A. Thread the Socket Assembly onto

the Base, hand tighten until sung.

B. Thread have hex nut end of

Nipple with Hex Nut into the hex
coupling, hand tighten until sung.

C. Place Spacer and Check Ring

over the Nipple with Hex Nut,
secure by threading the Small
Knurled Nut onto the nipple.
Hand tighten until sung.

D. Thread the Big Knurled Nut onto

the Nipple, hand tighten until
snug.

E. Place the Shade over the Nipple.

Secure by threading the Finial
onto the Nipple. Hand tighten
until snug.

F. This fixture uses standard bulb

with medium base . Maximum 75
watts.

G. Insert bulb and screw snugly into

place.

Your fixture is now assembled
and ready to use. Enjoy!

Shade

Small
Knurled Nut

Nipple with
Hex Nut

Hex

Coupling

Finial

Big Knurled
Nut

Check Ring

Spacer

Socket
Assembly

Bulb

Base

TF6660BB

FINISH: BRUSHED BULLION

26.5”

(2) 75W

NO.

1

2

3

4

Medium

Base

Bulbs

(Not Supplied)

PART NUMBER

M860BLA

16660BBT

C965FIR

G6894SH

NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/2"

REPLACEMENT PART DESCRIPTION

BALL 5/8" DIABRUSHED BULLION

BASE TABLE LAMPBRUSHED BULLION

FINIAL ARCHITECTURAL BRONZE

SHADE TIFFANY 7.5”H X 16”D

16” Dia.

3

7.5”

4

1

2

8.5” Dia.

REQ.

2

1

1

1

2014 QuoizelInc.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

Thank you for purchasing a Quoizel product.

or visit us on-line at www.quoizel.com

1of1

March2014