Quoizel TF1801T User Manual
Assembly Instruction Sheet #IS-TF1801T
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
,.
For Style TF1801T
ToolsRequired: None.
BulbRecommended:
EstimatedAssembly Time:
Preparation:
belowto be sure allparts are present. Ifany parts are missingor damaged, do notattempt to assemble, install,or
operatethe fixture. Contact customerservice for replacement parts.
Identifyand inspect all partsbefore beginning installation. Checkpackage content list anddiagrams
(2)Medium Base 75W Maximum,Alternate bulb (2)19W CFL
10-15minutes
Package Contents
Shade
A
x1
B
Base
x1
STEP 1 Install Stem-
A. Thread the short nipple end of the Stem
(E) into the Coupling on the top of the
Base (B). Hand tighten until snug.
Finial
C
x1
Flat
Washer
D
x1
Figure 1
STEP 2 Install Shade-
Stem
E
x1
Place the Flat Washer (D)
A. and the Shade
over the ( ). Secure by
(A) Stem E
threading the Finial ( ) onto the
( ). Hand tighten until snug.
E
CStem
E
Coupling
B
C
A
D
E
2014 Quoizel Inc.
Figure 2
Thank youfor purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
1of2
March2014
STEP 3 Install Bulb-
A. This fixture uses standard bulb with medium base . Maximum 75
watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
TF1801T
Bulb
Figure 3
16” Dia.
(2) 75W
Base
(Not Supplied)
PART NUMBER
NO.
11801TTF
1
2
G3809SH
Medium
Bulbs
7.5”
2
24.5”
1
7” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE TABLE LAMP TF1801T
SHADE TIFFANY 16"D x 8"H
REQ.
1
1
2014 Quoizel Inc.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
2of2
March2014
Loading...