Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1671T
For Style TF1671T
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (2) Medium Base 60W Maximum
EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering Septemberresult.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches
during shipment. If the oil applied is too heavy you can remove the excess oil film with a paper towel. Gently
wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and
wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a
small amount of lemon oil or mineral oil applied directly to oxidized areas and the soldered area will return to
like new.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of3
September2013
Page 2
TF1671T
14” Sq.
2
7”
22.5”
13.5”
1
6.5” Sq.
(2) 60W Medium
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
1
2
11671TTF
G3708SH
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE TABLE LAMP TF1671T
TIFFANY SHADE 14"SQ
REQ.
1
1
2of3
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Package Contents
Assembly Instruction Sheet #IS-TF1671T
For Style TF1671T
C
A
D
Part
A
B
C
D
E
Description
Stem
Base
Finial
Shade
Flat Wasehr
Quantity
1pc.
1pc.
1pc.
1pc.
1pc.
STEP 1 Assemble Stem to Base-
A. Thread the Short Nipple end of Stem (A) into Coupling
on the top of Base (B) as shown. Hand tighten until
snug.
STEP 2 Install Shade-
A. Place the Flat Washer (E) and Shade (D) over the Stem
(A), secure by threading the Finial (C) onto Stem (A).
Hand tighten until snug.
B
E
Stem
Coupling
Base
Figure 1
Finial
Shade
STEP 3 - Install Bulb
A. This fixture uses standard bulb with medium base .
Maximum 60 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
Flat Washer
Stem
Figure 2
Bulb
Socket
Figure 3
September2013
3of3
Loading...