Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1617SVB
For Style TF1617SVB
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
Quoizel, Inc.
strippers,electrical tape, safetyglasses.
6 Corporate Parkway
Goose Creek, SC
29445
BulbRecommended: (3) Medium Base100WMaximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
Customer Service
Phone 631.273.2700
Fax 631.231.7102
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
Description
A Crossbar
Nipple
B
Lock Washer
C
Hex Nut
D
Ceiling Canopy
E
Canopy Chain Loop
F
Canopy Lock Ring
G
H
Fixture Chain
Socket Assembly
I
J
Stem 5 1/8”L
K
Knurled Nut
Side Chain
L
Shade
M
Finial
N
Quantity
1pc.
1pc.
2 pcs.
3 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
4 pcs.
1pc.
1pc.
A
I
B
C
D
E
F
M
G
N
J
K
L
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
H
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of6
April2013
Page 2
TF1617SVB
FINISH: VINTAGE BRONZE
5.5” Dia.
QUIOZEL
GND
2.4 m m 13 G a
4
2
2”
Overall Height 127”
(Includes 96” Chain)
1
(3)100W
Medium Base Bulb
(Not Supplied)
PART NUMBER
NO.
1
113848ALWS BASE FOR TIFFANY PENDANT 1
27.5”
6”
5
3
21.5” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
REQ.
2
M1190CHVB
3
4
5
M2184FI
9403KIT
G2164SH
CHAIN 3.8MM X 4'
VINTAGE BRONZE
FINIAL 0.80"D X 1.38"H
MOUNTING HARDWARE 5.5"D
SHADE TIFFANY 21.5"D X 6.5H
2of6
1
1
1
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1617SVB
For Style TF1617SVB
STEP 1 - Attach Stem onto the Socket
Assembly
A. Thread one Hex Nut (D) onto Stem 5 1/8” L (J).
B. Thread Hex Nut end of (J) into Hex
Stem 5 1/8”” L
Coupling on the bottom of Socket Assembly (I), hand
tighten until snug.
STEP 2 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Figure 2
Mounting
Hole
Figure 1
Socket Assembly
Hex Coupling
Hex Nut
Stem 5 1/8”L
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
STEP 3 Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
3of6
Crossbar
Lock Washer
Hex Nut
Nipple
Figure 3
April2013
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1617SVB
For Style TF1617SVB
STEP 4 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (F) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop (F) and hand tighten until snug.
STEP 5 Assemble Ceiling Canopy-
A. Push the Ceiling Canopy (E) upward over the Outlet
Box. Thread the Canopy Lock Ring (G) onto the Canopy
Chain Loop (F) and tighten until snug to secure the
Ceiling Canopy (E).
Outlet Box
Nipple
Crossbar
Hex Nut
Lock Washer
Canopy
Chain Loop
Figure 4
Outlet Box
Canopy Chian Loop
STEP 6 Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. Adjust the Fixture Chain (H) to your desired length by
removing the links if needed. You may need to use plier
to open the chain links. If so, put a cloth over the chain
to protect the finish from the pliers.
B. Attach one end of the Fixture Chain (H) onto the
Canopy Chain Loop (F) and then attach the other end of
the Fixture Chain (H) onto the Fixture Loop.
Ceiling Canopy
Canopy
Lock Ring
Fixture Loop
Figure 5
Figure 6
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of6
April2013
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1617SVB
For Style TF1617SVB
STEP 7 Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (H) alternating links. Push the wires up
through the Canopy Chain Loop (F) into the outlet box.
STEP 8 - Make Wire Connections
A. Un-thread the Canopy Lock Ring (G) and slide Canopy Lock
Ring (G) and Ceiling Canopy (E) down the Fixture Chain (H).
B. Push all slack fixture wire through Canopy Chain Loop (F)
into Outlet Box. Trim excess fixture wire leaving a minimum
of 6 inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Black Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (E) as shown in Step 5.
Supply Wire
and Ground
Wire from
Outlet Box
Canopy Chain
Loop
Fixture Chain
Supply Wire
and Ground Wire
Figure 7
Supply Wire and
Ground Wire
Canopy Chain Loop
Fixture Chain
Ceiling Canopy
Canopy Lock Ring
White wire from supply Ribbed side
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
wire from fixture
Smooth side
wire from fixture
Figure 8
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
5of6
Figure 9
April2013
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1617SVB
For Style TF1617SVB
STEP 9 - Install Shade to fixture
A. Place the center hole on the Shade (M) over the Stem 5
1/8” L (J).
B. With one person hold the Shade (M), another person
attach the Hook on one chain end of the Side Chain (L) to
the Loop on the side of Canopy on the Socket Assembly
(I). Attach the Hook on the other end of the Side Chain (L)
to the Loop inside of the Shade (M).
C. Thread the Finial (N) onto the Stem 5 1/8” L (J) underside
of the Shade (M). Hand tighten until snug.
Socket
Assembly
Stem 5 1/8” L
Knurled Nut
Canopy
Figure 10
Loop
Hook
Side Chain
Hook
Loop
Shade
Finial
STEP 10 - Install Bulb
A. This fixture uses standard bulb with a standard screw
base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 11
Bulb
Socket
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of6
April2013
Loading...