Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1504TWT
For Style TF1504TWT
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (2) Medium Base 75W Maximum
EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
Package Contents
Description
Stem with Knurled Nut
Base
Finial
Shade
Quantity
1pc.
1pc.
1pc.
1pc.
A
C
D
B
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012QuoizelInc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
1of3
June2012
Page 2
TF1504TWT
FINISH: WESTERN BRONZE
18” Dia.
24”
7.5”
6.5”
(2) 75W Medium
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
1
6.5”
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
2of3
REQ.
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1504TWT
For Style TF1504TWT
STEP 1 Install the Stem-
A. Screw the beaded end of the Stem with Knurled Nut (A)
into the Coupling on the top center of the Base (B).
Hand tighten until snug.
STEP 2 - Attach Shade
A. Adjust the Knurled Nut on the top end of the Stem (A) to
proper location for the Shade (D) and the Finial (C).
B. Place the Shade (D) onto the top end of the Stem (A).
Secure by threading the Finial (C) onto the Stem (A).
Hand tighten until snug.
Figure 1
Harp
Coupling
Base
Finial
Shade
STEP 3 Install Bulb-
A. This fixture uses standard bulb with medium base .
Maximum 75 watts.
B. Insert bulb and screw snugly into place.
Knurled Nut
Stem
Figure 2
Figure 3
Bulb
Socket
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
3of3
June2012
Loading...