6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1488TRS
For Style TF1488TRS
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (2) Medium Base 75W Maximum
EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
E
Package Contents
Description
Flat Washer
Stem
Base
Finial
Shade
Quantity
1pc.
1pc.
1pc.
1pc.
1pc.
A
D
B
E
C
Thank you for purchasinga Quoizel product.
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc. October2012
or visit us on-lineat www.quoizel.com
1of3
TF1488TRS
FINISH: RUSSET
16” Dia.
2
8”
25.5”
1
9” Dia.
(2) 75W Medium
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
1
11488TRSTF
2
G3511SH
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE RUSSET TF1488TRS
TIFFANY SHADE 16"D
REQ.
1
1
2of3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1488TRS
For Style TF1488TRS
STEP 1 - Install Stem
A. Thread one end of the Stem (B) into the Coupling on the
top center of the Base (C). Hand tighten until snug.
STEP 2 Assemble Shade-
A. Place the Flat Washer (A) and the Shade (E) over the
top end of the Stem (B) and secure with the Finial (D).
Hand tighten until snug.
Figure 1
Stem
Coupling
Base
Finial
Shade
STEP 3 Install Bulb-
A. This fixture uses standard bulbs with medium screw
bases. Maximum 75 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
Socket
Flat Washer
Stem
Figure 2
Bulb
Figure 3
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
3of3
October2012
Loading...