6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1433T
For Style TF1433T
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (2) Medium Base 75W Maximum
EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
E
F
G
H
I
Package Contents
Description
Finial
Shade
Big Knurled Nut
Small Knurled Nut
Check Ring
Tube
Nipple
Socket Assembly
Base
Quantity
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
A
H
B
C
I
D
E
F
G
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of4
November2013
TF1433T
16” Dia.
2
6.5”
23”
14.5”
1
(2)75W
Medium Base Bulb
(Not Supplied)
PART NUMBER
NO.
1
2
11433TTF BASE TF1433T
G3430SH
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
GLASS SHADE TIFFANY 16"D X 6.50"H
REPLACEMENT PART DESCRIPTION
2of4
REQ.
1
1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
STEP 1 attach Socket Assembly to Base-
,.
Assembly Instruction Sheet #IS-TF1433T
For Style TF1433T
A. Thread Socket Assembly (H) to Base (I), hand tighten
until snug.
STEP 2 attach Center Stem to Fixture Body-
A. Thread one end of Center Stem (F) into Hex Coupling on
the top of SocketAssembly (H).
B. Please Tube (F) and Check Ring (E) over the Nipple (G).
Secure by thread Small Knurled Nut (D) onto the Nipple
(G), hand tighten until snug.
Socket Assembly
Base
Figure 1
Small Knurled Nut
Check Ring
Tube
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Hex Coupling
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of4
Nipple
Socket Assembly
Figure 2
November2013
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1433T
For Style TF1433T
STEP 3 attach Shade to Fixture Body-
A. Thread Big Knurled Nut (C) onto Center Stem (G).Hand
tighten until snug.
B. Place Shade (B) over Nipple (G).Adjust the Big Knurled
Nut (C) to proper location for the Shade (B) and Finial
(A). secure by thread Finial (A) onto the Nipple (G),
hand tighten until snug.
Finial
Shade
Big Knurled Nut
Nipple
STEP 4 - Install Bulb
A. This fixture uses standard bulb with standard screw
base . Maximum 75 watts.
B. Insert bulb and screw snugly into place.
Your lamp is now assembled and ready to use.
Enjoy!
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
Figure 3
Figure 4
Bulb
Socket
November2013
4of4
Loading...