6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1427F
For Style TF1427F
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (2) Medium Base 100W Maximum
EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
E
F
G
H
I
J
L
Package Contents
Description
Finial
Shade
Flat Washer
Big Knurled Nut
Small Knurled Nut
Check Ring
Tube
Nipple with Hex Nut
Socket Assembly
Rod
Rod with ConnecterK
Base
Quantity
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
2 pcs.
1pc.
A
B
C
J
D
K
E
F
G
H
I
L
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of4
November2013
TF1427F
17” Sq.
9”
2
60”
49”
1
(2)100W
Medium Base Bulb
(Not Supplied)
PART NUMBER
NO.
1
2
11427FTF BASE TF1427FTF
G3428SH
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
GLASS SHADE TIFFANY 17"D X 9"H
REPLACEMENT PART DESCRIPTION
2of4
REQ.
1
1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1427F
For Style TF1427F
STEP 1 Assemble Rod and Socket
-
Assembly
A. Thread the Rod (J) and Rod with Connecter (K) to the
Base (L) as shown. Hand tighten until snug.
B. Thread the Socket Assembly (I) into the top end of Rod
(J). Hand tighten until snug.
STEP 2 attach Center Stem to Fixture Body-
A. Thread one end of Nipple with Hex Nut (H) into Hex
Coupling on the top of SocketAssembly (I).
B. Please Tube (G) and Check Ring (F) over the Nipple
with Hex Nut (H). Secure by thread Small Knurled Nut
(E) onto the Nipple with Hex Nut (H), hand tighten until
snug.
Rod with
Connecter
Rod with
Connecter
Check
Ring
Socket
Assembly
Rod
Base
Figure 1
Small Knurled Nut
Tube
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Hex
Coupling
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of4
Nipple with Hex Nut
Socket
Assembly
Figure 2
November2013
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1427F
For Style TF1427F
STEP 3 attach Shade to Fixture Body-
A. Thread Big Knurled Nut (D) onto Nipple with Hex Nut
(H).Hand tighten until snug.
B. Place the Flat Washer (C) and the Shade (B) over
Nipple with Hex Nut (H). Adjust the Big Knurled Nut (D)
to proper location for the Flat Washer (C), the Shade (B)
and Finial (A). secure by thread Finial (A) onto the
Nipple with Hex Nut (H), hand tighten until snug.
Finial
Flat Washer
Shade
Big Knurled Nut
Nipple with Hex Nut
STEP 4 - Install Bulb
A. This fixture uses standard bulb with standard screw
base . Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your lamp is now assembled and ready to use.
Enjoy!
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
Figure 3
Figure 4
Bulb
Socket
November2013
4of4
Loading...