Quoizel TF124TVA User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
ToolsRequired: Flatheadscrewdriver,Phillipsscrewdriver, pliers,wirecutters, wire strippers,electricaltape, safety glasses.
BulbRecommended:
EstimatedAssembly Time:
Preparation:
present.Ifany parts aremissingor damaged, donotattempt to assemble,install,or operate thefixture.Contact customer serviceforreplacement
parts.
,.
(2)MediumBase 75W Maximum,Alternate bulb (2)19WCFL
20-30minutes
Identifyandinspect all partsbeforebeginning installation. Checkpackagecontent list anddiagramsbelow to besureall parts are
Assembly Instruction Sheet #IS-TF124TVA
For Style TF124TVA
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
Care of Tiffany Style Shade
A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.
For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.
If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.
STEP 1 Assemble Shade-
A. Thread have hex nut end of
Nipple with Hex Nut into the
hex coupling, hand tighten
until sung.
B. Place Spacer and Check
Ring over the Nipple with
Hex Nut, secure by
threading the Small Knurled
Nut onto the nipple. Hand
tighten until sung.
C. Thread the Big Knurled Nut
onto the Nipple, hand
tighten until snug.
D. Place the Flat Washer and
the Shade over the Nipple.
Secure by threading the
Finial onto the Nipple. Hand
tighten until snug.
E.This fixture uses standard
bulb with medium base .
Maximum 75 watts. Insert
bulb and screw snugly into
place.
Your fixture is now
assembled and ready to
use. Enjoy!
Figure 1
Check Ring
x1
Nipple with
Hex Nut
x1
Spacer
x1
Finial
X1
Shade
X1
Flat Washer x 1
Big Knurled Nut x 1
Small Knurled Nut
x1
Bulb (not
included)
Base
X1
TF124TVA
(2) 75W
Base
(Not Supplied)
PART NUMBER
NO.
1124TVAT
1
2
M1480FIVA
3
G8048SH
Medium
Bulbs
17” SQ.
2
3
9.5”
29”
1
7”
NOTE: ALL DIMENSIONS ARE ROUNDED
UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE VALIANT BRONZE TABLE LAMP
FINIAL 1.50H X 1.25D TF124TVA
GLASS TIFFANY REPL 17"SQ.
REQ.
1
1
1
2014 Quoizel Inc.
Need assistance with partsorassembly?CallQuoizel customer service at 1-631-273-2700
Thank you for purchasingaQuoizelproduct.
or visit us on-lineatwww.quoizel.com
1of1
February2014
Loading...