Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1135T
For Style TF1135T
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (2) Medium Base 60W Maximum
EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
E
Package Contents
Description
Shade
Base
Finial
Flat Washer
Stem
Quantity
1pc.
1pc.
1pc.
1pc.
1pc.
C
A
D
E
B
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of4
November2011
Page 2
TF1135T
16”
2
7.5”
23.5”
3
1
6.5”
(2)60W Medium
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
1
2
3
11135TTF
M2260FI
G2841SH HADE TIFFANY 16"D X 7.5"H
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
BASE TF1135T
FINIAL .5"SQ X 1"H
REPLACEMENT PART DESCRIPTION
2of4
REQ.
1
1
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1135T
For Style TF1135T
STEP 1 - Install Stem
A. Thread the no beaded end of Stem (E) into the Coupling
on the top of Base (B). Hand tighten until snug.
Stem
Coupling
Base
STEP 2 Assemble Shade-
A. Place the Flat Washer (D) and Shade (A) over the Stem
(E). Secure by thread the Finial (C) onto the Stem.
Hand tighten until snug.
Figure 1
Finial
Shade
Flat Washer
Stem
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of4
Figure 2
November2011
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1135T
For Style TF1135T
STEP 3 Install Bulb-
A. This fixture uses standard bulbs with medium screw
bases. Maximum 60 watts.
B. Insert bulb and screw snugly into place.
Your fixture table lamp is now assembled and ready to
use. Enjoy!
Bulb
Socket
Figure 3
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of4
November2011
Loading...