Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1135F
For Style TF1135F
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (2) Medium Base 100W Maximum
EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
E
F
G
H
Package Contents
Description
Shade
Base
Finial
Flat Washer
Stem
Socket Assembly
Rod
Rod with Connecter
Quantity
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
2 pcs.
A
F
B
G
C
D
H
E
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of4
November2011
Page 2
TF1135F
18” Dia.
2
8”
3
59.5”
1
(2)100W Medium
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
1
2
3
11135FTF
M2260FI
G2853SH SHADE TIFFANY 18"D X 8"H
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE 2L FOR TF1135T
FINIAL 0.5"SQ X 1"H
11” Dia.
REQ.
1
1
1
2of4
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1135F
For Style TF1135F
STEP 1 Assemble Rod and Socket
-
Assembly
A. Thread the Rod (G) and Rod with Connecter (H) to the
Base (B) as shown. Hand tighten until snug.
B. Thread the Socket Assembly (F) into the top end of Rod
(G). Hand tighten until snug.
Rod with
Connecter
Rod with
Connecter
Socket
Assembly
Rod
Base
STEP 2 - Install Stem
A. Thread the no beaded end of Stem (E) into the Coupling
on the top of Socket Assembly (F). Hand tighten until
snug.
Figure 1
Stem
Coupling
Socket
Assembly
Figure 2
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of4
November2011
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-TF1135F
For Style TF1135F
STEP 3 Assemble Shade-
A. Place the Flat Washer (D) and Shade (A) over the Stem
(E). Secure by thread the Finial (C) onto the Stem.
Hand tighten until snug.
Finial
Shade
Flat Washer
Stem
STEP 4 Install Bulb-
A. This fixture uses standard bulbs with medium screw
bases. Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your fixture floor lamp is now assembled and ready to
use. Enjoy!
Figure 3
Bulb
Socket
Figure 4
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of4
November2011
Loading...