Quoizel TF1021TVB User Manual

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

..

ToolsRequired: Flatheadscrewdriver,Phillipsscrewdriver, pliers,wirecutters, wire strippers,electricaltape, safety glasses.
Bulb Recommended:
EstimatedAssembly Time:
Preparation:

present.Ifany parts aremissingor damaged, donotattempt to assemble,install,or operate thefixture.Contact customer serviceforreplacement
parts.

,.

( )CandelabraBase WMaximum.

125

20-30minutes

Identifyandinspect all partsbeforebeginning installation. Checkpackagecontent list anddiagramsbelow to besureall parts are

Assembly Instruction Sheet #IS-TF1021TVB

For Style TF1021TVB

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.

Care of Tiffany Style Shade

A new tiffany lamp shade has an oil film applied to the shade that protects the tiffany shade from scratches during shipment. If the oil applied is
too heavy you can remove the excess oil film with a paper towel. Gently wipe away the excess oil.

For general cleaning of tiffany shades use a gentle lemon oil-based furniture polish applied to a soft cloth and wipe gently.

If a white powder appears on the soldered joints of the tiffany shade this is a normal oxidation process. Use a small amount of lemon oil or
mineral oil applied directly to oxidized areas and the soldered area will return to like new.

INSTALLATION

A. Insert the Harp by pressing the bottom ends of the Harp into the harp

clips.

B. Place the Shade onto the top end of the Harp and secure with the

Finial. Hand tighten until snug.

C. This fixture uses candelabra bulb with standard screw base.

Maximum 25 watts.

D. Insert bulb and screw snugly into place.

Your fixture is now assembled and ready to use. Enjoy!

Finial
X1

Shade
X1

Harp
X1

Bulb (not
included)

TF1021TVB

5”SQ.

5.5”

12”

3.5”SQ.

Harp Clip

2014 Quoizel Inc.

Socket

(1) 25W Candelabra

Base
X1

NO.

1

2

Thank you for purchasing a Quoizel product.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

or visit us on-line at www.quoizel.com

1of1

Bulbs

Base

(Not Supplied)

PART NUMBER

M1373FIVA

G2768SH

NOTE: ALL DIMENSIONS ARE ROUNDED

UP TO THE NEAREST 1/2"

REPLACEMENT PART DESCRIPTION

FINIAL VLNT BRNZ 1.04H X .98SQ

SHADE TIFFANY 6.5"SQ X 5"H

REQ.

1

1

May2014