Quoizel TB8603C User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS TB8603STYLE NUMBER TB8603C:
PACKAGECONTENTS
Part
A
Crossbar
B
Green Ground Screw
Mounting Screws
C
Lock Washer
D
Hex Nut
E
Mounting Ball
F
Finial
G
Socket Collar
H
Steel Washer
I
Shade
J
Fixture Body
K
Socket Collar Tool
L
Cage
M
!
WARNINGSANDCAUTIONS
Description
Quantity
1pc
1pc
2pcs
2pcs
2pcs
2pcs
2pcs
3pcs
3pcs
3pcs
1pc
1pc
3pcs
ISSUED 03-2008 Revised 2009-07-02
H
A
B
C
D
E
F
G
I
J
K
WARNING:
● Before beginning th e in stalla tio n, turn off electricity at the cir cuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are pr ovi ded for yo ur safety. It is very importan t that they are read comple tely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replaci ng the bulb(s), making sure the bulb(s) had suffi cient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
L
M
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts wit h p ackage
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Est imated Assembly Time: 15 30 minutes
● Tool s Required for Assembly (not inclu ded): Flathead screwdrive r Phill ips screwdriver, pli ers, electrical
tape, wire cutters, safety glasses &3, 100 Watt, Type A Medium Base Bulbs.
,
-
● Helpful Tools (not in clu ded): Wire Strippers.
INSTALLATION INSTRUCTIONS
STEP 1:
a Screw the Mounting Screws into the Crossbar
. ,
place the Lock Washers over the Mounting Screws
and thread the Hex Nuts onto the Mounting Screws
as shown Secure the position of the Mounting
Screws by tightening the Hex Nuts against the
Crossbar
b Secure the Crossbar to the Outlet Box with Outlet
.
Box Screws
.
.
.
Outlet Box
Mounting Screw
Crossbar
Lock Washer
Outlet Box Screw
Hex Nut
1 OF 2
INSTALLATION INSTRUCTIONS
STEP 2:
* ( )
Use Wire Connectors not supplied to connect
the wires
.
a Connect the House Ground Wire to the Fixture
Ground Wire.
.
b Connect the House White Wire to the Fixture
Supply Wire White or Ribbed Side .
. ( )
c Connect the House Black or Red Wire to the
Fixture Supply Wire Black or Smooth Side
.
d Wrap each connection with approved electrical
tape and carefully stuff all of the connected wires
into the Outlet Box
.
( )
( ).
.
WHITE WIRE
FROM HOUSE
BLACK OR RED WIRE( )
FROM HOUSE
GROUND WIRE
FROM HOUSE
STYLE NUMBER TB8603C:
WHITE OR RIBBED
FROM FIXTURE
BLACK OR SMOOTH
FROM FIXTURE
GROUND WIRE
FROM FIXTURE
STEP 3:
a Push Finials into the ends of the Tube as shown..
STEP 4:
a. Place the Backplate over the Mounting Screws and
secure with Mounting Balls. Hand tighten until
snug.
STEP 5:
a Locate Cages Shades and Steel Washers over
. ,
Sockets in turn Using Socket Collar Tool
supplied thread Socket Collars onto Sockets
( ),
to secure them together Hand tighten until snug
.
. .
Tube
Finial
Outlet Box
Mounting Screw
Backplate
Mounting Ball
Socket Collar Tool
Socket Collar
Steel Washer
Shade
Cage
Socket
STEP 6:
a Install the correct Bulbs referring to fixture markings and or labels for maximum wattage
. / .
Your installation is completed now Restore electricity Keep this sheet for future reference
. . .
2 OF 2
Loading...