Quoizel SPH5009BN User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS-SPH5009
STYLE NUMBER: SPH5009PN, SPH5009BN
PACKAGE CONTENTS
PART
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
DESCRIPTION
Green Ground Screw
Hex Nut
Nipple
Lock Washer
Canopy Chain Loop
Canopy Lock Ring
Fixture Chain
Ceiling Canopy
Fixture Loop
Socket Collar
Steel Collar
Shade
Fixture Assembly
QUANTITY
1pc
1pc
2pcs
1pc
2pcs
1pc
1pc
1pc
1pc
1pc
9pcs
9pcs
9pcs
1pc
ISSUED 08-2010 REVISED 2011-07-15
A
B
C
D
E
F
G
H
I
N
J
K
L
M
WARNINGS AND CAUTIONS
WARNING:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching
off the circuit breaker or removing the fuse.
CAUTION:
● These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb9s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (9) 100W A19 medium base bulbs
● Helpful Tools (not included): Wire strippers.
1OF5
.
INSTALLATION INSTRUCTIONS
STYLE NUMBER: SPH5009PN, SPH5009BN
STEP 1:
a. Unfold the Support Arms to proper locations.
b. Thread the Fixture Loop onto the nipple on the top
center of the Fixture Assembly. Hand-tighten until
snug.
STEP 2:
a. Secure the Crossbar onto the Outlet Box with Outlet
Box Screws. Tighten until snug.
Fixture Loop
Fixture Assembly
Support Arm
Support Arm
Outlet Box
STEP 3:
a. Thread one Hex Nut onto top end of the Nipple.
b. Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of
the Crossbar.
c. Using pliers, thread the Hex Nut against the Crossbar
and hand-tighten until snug.
Crossbar
Crossbar
Outlet Box
Screw
Lock Washer
Hex Nut
Nipple
2OF5
Loading...