Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-SLM8406AC
For Style SLM8406AC
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
strippers,electrical tape, safetyglasses.
BulbRecommended: (1)Candelabra Base 60WMaximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
A Inner Backplate
B
C
D
Description
Mounting Screw
Fixture Body
Candle Cover
Quantity
1pc.
2 pcs.
1pc.
1pc.
A
C
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
B
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of6
D
October2012
Page 2
SLM8406AC
FINISH: AGED COPPER
7”
3
17”
2
1
6”
6”
(1)60W
NO.
1
2
3
Candelabra
Base
(Not Supplied)
PART NUMBER
18406ACSLM
G3397PA
G3396PA
Bulb
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE AGED COPPER
DOOR CLEAR GLASS PANEL
FRONT AND SIDE CLEAR GLASS PANEL
2of6
REQ.
1
1
3
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-SLM8406AC
For Style SLM8406AC
STEP 1 - Attach Inner Backplate to Outlet
Box
A. Attach the Inner Backplate (A) to Outlet Box and secure
by threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
STEP 2 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Outlet Box
Inner Backplate
Mounting Hole
Outlet Box
Screw
Figure 1
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 3
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
or visit us on-line at www.quoizel.com
3of6
Figure 2
October2012
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-SLM8406AC
For Style SLM8406AC
STEP 3 - Attach Fixture Body to Inner
Backplate
A. Place the backplate of the Fixture Body (C) onto the
Inner Backplate (A). Line up holes on both of them.
Thread Mounting Screws (B) into the mounting holes on
the Inner Backplate (A) and hand tighten until snug to
secure them.
Fixture Body
Mounting
Hole
Mounting Screw
Inner
Backplate
STEP 4 Attach Candle Cover to Fixture
-
Body
A. Open the Door by throw the Bolt off the Bolt Holder and
put the Candle Cover (D) onto the Socket.
Bolt
Bolt Holder
Figure 5
Backplate
Figure 4
Figure 6
Candle Cover
Socket
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of6
October2012
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-SLM8406AC
For Style SLM8406AC
STEP 5 Install Bulb and Bulb Shield-
A. Install standard bulb with a standard screw base.
Maximum 60 watts.
B. Insert bulb and screw properly into place.
C. Close the Door by placing the Bolt onto the Bolt Holder.
Bolt
Bolt Holder
Figure 8
Bulb
Socket
Figure 7
STEP 6 Apply Silicone Sealer to Mounting
-
Screws
A. To prevent moisture from entering the wire
compartment, apply a small amount of silicone sealer
(not included) to the threaded side of the mounting
Screws (B) and then install them onto the mounting
Hole on the side of inner (A). Wipe off
excess caulk.
Backplate
Figure 9
Mounting
Screw
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of6
October2012
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-SLM8406AC
For Style SLM8406AC
STEP 7 Apply Silicone Sealer to Backplate-
A. Make sure exterior wall surface and fixture backplate
are free of dirt before applying caulk. Using exterior
grade caulk, start on one side of fixture backplate and
follow contour, where the fixture backplate meets the
exterior wall surface upward. Proceed to caulk over top
of backplate and down other side. Do not caulk bottom
of fixture backplate to ensure proper moisture
drainage.
Your fixture is now assembled and ready to use.
Enjoy!
Exterior Wall Surface
Outdoor
Fixture
Backplate
Figure 10
Exterior
Grade Caulk
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of6
October2012
Loading...