BulbRecommended: (4) Medium Base100WMaximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
Customer Service
Phone 631.273.2700
Fax631.231.7102
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
May2013
1of8
Page 2
RL2820WT01
FINISH: WESTERN BRONZE
2.4mm
13Ga
QUOIZEL
GND
R
5.5” Dia.
1”
1
Overall Height 121”
2
(Includes 96” Chain)
(4)100W Medium
Base Bulb
(Not Supplied)
22.5”
4.5”
3
18” Dia.
20” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
PART NUMBER
NO.
12820WTRL
1
2
M2100CHWT
3
G3544SH
REPLACEMENT PART DESCRIPTION
BASE WESTERN BRONZE RL2820WT01
CHAIN 3.8MM, 4'L, WESTERN BRONZE
SHADE LIGHT AMBER AND HAMMERED GLASS 16"D
2of8
REQ.
1
1
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Package Contents
Assembly Instruction Sheet #IS-RL2820WT01
For Style RL2820WT01
J
A
Part
ACrossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
Description
Nipple
Lock Washer
Hex Nut
Canopy Chain Loop
Canopy Lock Ring
Fixture Chain
Ceiling Canopy
Fixture Loop
Socket Assembly
Side Arm
Mounting Ball
Small Plastic Washer
Lock Screw
Shade
Big Plastic Washer
Flat Washer
Finial
Quantity
1pc.
1pc.
2 pcs.
3 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
3 pcs.
3 pcs.
6 pcs.
3 pcs.
1pc.
2 pcs.
1pc.
1pc.
K
B
C
D
E
L
F
M
G
N
H
I
O
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of8
P
Q
R
May2013
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-RL2820WT01
For Style RL2820WT01
STEP 1Attach Finial to Shade-
A. Pass one Big Plastic Washer (P) over the nipple on the
Finial (R). Attach the Finial (R) onto the bottom center
of the Shade (O). Pass another Big Plastic Washer (P)
and the Flat Washer (Q) over the Finial (R). Secure the
Hex Nut (D) onto the Finial (R) to secure them together.
Tighten gently until snug.
STEP 2Attach Fixture Loop to Socket
-
Assembly
A. Thread Fixture Loop (I) into the Hex Coupling on the top
of Socket Assembly (J), hand tighten until snug.
Finial
Hex Nut
Flat Washer
Shade
Big Plastic Washer
Figure 1
Fixture Loop
Hex Coupling
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Socket Assembly
Figure 2
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
May2013
4of8
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-RL2820WT01
For Style RL2820WT01
STEP 3Attach Side Arms to Shade-
A. Pass Lock Screw (N) through Small Plastic Washers
(M) and the Shade (O) as shown. Thread Lock Screw
(N) into the mounting hole on Side Arm (K) and hand
tighten until snug.
Figure 3
Side Arm
Lock Screw
Small Plastic Washer
Shade
Small Plastic Washer
STEP 4Attach Side Arm to Socket
-
Assembly
A. Pass the holes on the Pan over Nipples at top ends of
Side Arms (K) as shown. Secure by threading Mounting
Balls (L) onto Nipples at top ends of SideArms (K).
Hand tighten until snug.
Mounting Ball
Pan
Nipple
Side Arm
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Figure 4
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
May2013
5of8
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-RL2820WT01
For Style RL2820WT01
STEP 5Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Crossbar
Lock Washer
Hex Nut
STEP 6 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (E) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop (E) and hand tighten until snug.
STEP 7Assemble Ceiling Canopy-
A. Push the Ceiling Canopy (H) upward over the Outlet
Box. Thread the Canopy Lock Ring (F) onto the Canopy
Chain Loop (E) and tighten until snug to secure the
Ceiling Canopy (H).
Outlet Box
Crossbar
Lock Washer
Canopy
Chain Loop
Nipple
Figure 5
Nipple
Hex Nut
Figure 6
Canopy Chian Loop
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Ceiling Canopy
Canopy
Lock Ring
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of8
Figure 7
May2013
Page 7
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-RL2820WT01
For Style RL2820WT01
STEP 8Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. Adjust the Fixture Chain (G) to your desired length by
removing the links if needed. You may need to use plier
to open the chain links. If so, put a cloth over the chain
to protect the finish from the pliers.
B. Attach one end of the Fixture Chain (G) onto the
Canopy Chain Loop (E) and then attach the other end of
the Fixture Chain (G) onto the Fixture Loop (I) on the
top of the fixture.
STEP 9Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (G) alternating links. Push the wires up
through the Canopy Chain Loop (E) into the outlet box.
Fixture Loop
Figure 8
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
Canopy Chain
Loop
Fixture Chain
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Supply Wire
and Ground Wire
Figure 9
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
May2013
7of8
Page 8
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-RL2820WT01
STEP 10 - Make Wire Connections
For Style RL2820WT01
A. Un-thread the Canopy Lock Ring (F) and slide Canopy Lock
Ring (F) and Ceiling Canopy (H) down the Fixture Chain (G).
B. Push all slack fixture wire through Canopy Chain Loop (E)
into Outlet Box. Trim excess fixture wire leaving a minimum
of 6 inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Black Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (H) as shown in Step 7.
White wire from supplyWhite wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Supply Wire
and Ground
Wire from
Outlet Box
Supply Wire and
Ground Wire
Canopy Chain Loop
Fixture Chain
Ceiling
Canopy
Canopy Lock Ring
Figure 10
Ground wire from supplyGround wire from fixture
Figure 11
STEP 11 - Install Bulb
A. This fixture uses standard bulb with medium screw base.
Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Socket
Bulb
Figure 12
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
May2013
8of8
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.