BulbRecommended: (1)Medium Base 100WMaximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Assembly Instruction Sheet #IS-RL1505WT
For Style RL1505WT
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
A
Part
ACrossbar
B
C
D
E
F
G
H
I
J
KSocket Collar
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Ceiling Canopy with Loop
6” Rod
12” Rod
Socket Assembly
Shade
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
F
B
C
D
E
I
G
H
J
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of5
K
October2012
Page 2
RL1505WT
FINISH: WESTERN BRONZE
R
6”
12”
13Ga
QUOIZEL
GND
2.4mm
5.5” Dia.
1”
3
1
2
(1)100W Medium
Base Bulb
(Not Supplied)
46.5”
OVERALL HEIGHT INCLUDES
(2) 6” AND 12” RODS
4
6.5”
5”
5” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
PART NUMBER
NO.
1
11505WTRL
2
3
4
9012EXWT
9006EXWT
G3469SH
REPLACEMENT PART DESCRIPTION
BASERL1505WT
WESTERN BRONZE
RODS 0.5'D, 12” L WESTERN BRONZE
RODS 0.5'D, 6" L WESTERN BRONZE
SHADE LIGHT AMBER 5"D, 5"H
2of5
REQ.
1
2
2
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-RL1505WT
For Style RL1505WT
STEP 1Assemble Rods-
A. Determine the Rods (G/H) to be assembled to the Socket
Assembly (I) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (G/H) and then thread the chosen Rods (G/H) to the
Socket Assembly (I). Hand tighten until snug.
Supply Wire and
STEP 2 - Attach Ceiling Canopy with Loop to
Rod
A. Pass Supply Wire and Ground Wire through the Loop and
the Ceiling Canopy. Thread the Loop underside of the
Ceiling Canopy onto the Upper Rod and hand tighten until
snug.
Figure 1
Ground Wire
Socket
Assembly
Ceiling Canopy
6” Rod
6” Rod
12” Rod
12” Rod
Figure 2
Loop
STEP 3 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex
Nut (D) onto the Mounting Screws (B). Hand tighten
until snug.
Upper Rod
Mounting
Screw
Ceiling Canopy
Supply Wire and
Ground Wire
Crossbar
Lock Washer
Hex Nut
Figure 3
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of5
October2012
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-RL1505WT
For Style RL1505WT
STEP 4 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
STEP 5Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 4
Mounting
Hole
Outlet Box
Crossbar
Outlet Box
Screw
Figure 5
White wire from supplyWhite wire from fixture
Black wire from supply
(or Red)
Ground wire from supplyGround wire from fixture
Black wire from fixture
Figure 6
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2012 QuoizelInc.
4of5
October2012
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-RL1505WT
For Style RL1505WT
STEP 6Assemble Ceiling Canopy to Outlet
-
Box
A. Push the Ceiling Canopy (F) upward over the Outlet