Preparation:Identifyandinspect all partsbeforebeginninginstallation. Check package
contentlistanddiagrams below tobesureall parts arepresent.Ifany parts aremissing
ordamaged,donot attempt toassemble,install,or operate thefixture.Contactcustomer
serviceforreplacementparts.
Assembly Instruction Sheet #IS-REM5004C
For Style REM5004C
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
A
I
Package Contents
Part
ACrossbar
B
C
D
E
F
G
H
I
J
K
L
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Ceiling Canopy
6” Rod
12” Rod
Socket Assembly
Socket Collar
Shade
10” Rod
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
2 pcs.
2 pcs.
1pc.
4 pcs.
4 pcs.
1pc.
B
J
C
D
K
E
F
L
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
G
H
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
November2012
1of5
Page 2
REM5004C
FINISH: POLISHED CHROME
3
6”
2
12”
2.4mm
13Ga
QUOIZEL
R
4.5” Sq.
GND
1”
52”
OVERALL HEIGHT INCLUDES
(2) 6” AND 12” RODS
4
(4)75W Medium
Base Bulbs
(Not Supplied)
6”
13.5”
1
29”
5.5”
10.5”
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
PART NUMBERREPLACEMENT PART DESCRIPTION
NO.
1
2
3
4
15004CREM
9012EXC
9006EXC
S1397WH
BASE POLISHED CHROME REM5004C
EXTENSION ROD CHROME 12”
EXTENSION ROD CHROME 6”
WHITE FABRIC SHADE REM5004C
2of5
REQ.
1
2
2
4
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-REM5004C
For Style REM5004C
STEP 1Assemble Rods-
A. Thread 10” Rod (L) onto the Socket Assembly (I), hand
tighten until snug.
B. Determine the Rods (G/H) to be assembled to the Socket
Assembly (I) according to your hanging height.
C. Pass Supply Wires and Ground Wire through the chosen
Rods (G/H) and then thread the chosen Rods (G/H) and
the Socket Assembly (I) together. Hand tighten until snug.
Assembly
Figure 1
Supply Wire and
Ground Wire
Socket
6” Rod
6” Rod
12” Rod
12” Rod
10” Rod
STEP 2Assemble Ceiling Canopy to Upper
-
Rod
A. Pass Supply Wires and Ground Wire through the Ceiling
Canopy (F) and then thread the Ceiling Canopy (F) and
the Upper Rod together. Hand tighten until snug.
STEP 3 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy (F).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
Mounting Screw
Lock Washer
Ceiling
Canopy
Figure 2
Ceiling
Canopy
Supply Wire and
Ground Wire
Upper Rod
Crossbar
Hex Nut
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Figure 3
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
November2012
3of5
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-REM5004C
For Style REM5004C
STEP 4 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
STEP 5Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 4
Outlet
Box
Crossbar
Mounting
Hole
Outlet Box
Screw
Figure 5
White wire from supplyWhite wire from fixture
Black wire from supply
(or Red)
Ground wire from supplyGround wire from fixture
Black wire from fixture
Figure 6
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
or visit us on-line at www.quoizel.com
4of5
November2012
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-REM5004C
For Style REM5004C
STEP 6 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy (F) over the Mounting Screws
(B) and secure with Mounting Balls (E). Hand tighten
until snug.
STEP 7Install Shade to fixture-
A. Place Shade (K) over Socket, thread the Socket Collar (J)
onto Socket. Hand tighten until snug.
Mounting
Screw
Ceiling Canopy
Figure 8
Figure 7
Mounting
Ball
Socket
Collar
Shade
STEP 8Install Bulb-
A. This fixture uses standard bulb with a standard screw base.
Maximum 75 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Socket
Figure 9
Socket
Bulb
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
November2012
5of5
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.