Quoizel QJF15078BTR User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS QJF15078STYLE NUMBER QJF15078BTR:
PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
J
K
L
!
WARNINGSAND CAUTIONS
Description
Finial
Cap
Small Knurl Nut
Big Knurl Nut
Flat Washer
Rubber Washer
Check Ring
Spacer Tube
Nipple withHex Nut
Hex Nut
Shade
Base
Quantity
1pc
1pc
1pc
1pc
2pcs
2pcs
1pc
1pc
1pc
1pc
1pc
1pc
A
B
C
D
E
F
G
H
I
J
K
ISSUED 05-2008 Revised 2008 07 30--
CAUTIONS:
●
These instructions are provided for your safety. It is very important to read completely before the
installation of your fixture.
●
We strongly recommend that a professional electrician install the fixture.
●
Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
L
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
●
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
●
Estimated Assembly Time : 15 30 minutes
●
Tools Required for Assembly (not included) : Flathead screwdriver Phillips screwdriver, pliers, electrical
tape, wire cutters, safety glasses &2, 75 Watt, Type A Medium Base Bulbs.
●
Helpful Tools(not included): Wire Strippers.
ASSEMBLY INSTRUCTIONS
STEP 1 :
a. Place Base onto a flat work surface
..
b Position Nipple with Hex Nut Screw the Hex Nut end
into Hex Coupling Using pliers thread the Hex Nut
against Hex Coupling and hand tighten until snug
.,
,
-
.
.
Nipple with Hex Nut
Hex Coupling
Base
ASSEMBLY INSTRUCTIONS
STYLE NUMBER QJF15078BTR:
STEP 2 :
a. Place Spacer Tube and Check Ring over the Nipple
attaching onto the top center of Socket Cluster
Assembly Secure with Small Knurl Nut, tighten until sung.
.
b. Thread Big Knurled onto Nipple, hand tighten until sung.
.
c Proceed to place the following components over the
top end of Nipple in turn
Flat Washer Rubber Washer Shade Rubber Washer
,,,
:
and Flat Washer over the Nipple, secure with Hex Nut,
tighten until snug
.
,
Hex Nut
Flat Washer
Flat Washer
Nipple
Rubber Washer
Shade
Rubber Washer
Big Knurl Nut
Small Knurl Nut
Check Ring
Spacer Tube
Socket
Cluster
Assembly
STEP 3 :
a. Place the Cap over the Nipple onto the top of the Shade
.
b Thread Finial onto the Nipple and tighten until snug to
secure the Cap
.
Finial
.
Cap
Stem
Shade
STEP 4:
. /.
a Install the correct wattage Bulbs referring to the fixture markings and or labels for maximum wattage
..Your assembly is completed now Plug the plugs into the Wall Outlet Box
Loading...