Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-QF1678BN
For Style QF1678BN
ToolsRequired:Flatheadscrewdriver,Phillips screwdriver,pliers,wirecutters, wire
strippers,electricaltape,safetyglasses.
BulbRecommended: (1) Medium Base 100 W Maximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identifyandinspectallpartsbefore beginning installation. Check package
contentlistanddiagramsbelowto be sure all parts are present. If any parts are missing
ordamaged,donotattempttoassemble, install, or operate the fixture. Contact customer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
G
H
I
J
Part
A Crossbar
B
C
D
E
F
G
H
J
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Fixture Body
Shade
Socket Collar
I
Ribbed Glass Shade
Lock Ball
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
3 pcs.
A
B
C
D
E
F
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of5
June2014
Page 2
QF1678BN
FINISH: BRUSHED NICKEL
1
6.5" Dia.
1”
11” Dia.
11.5" Dia.
12.5" Dia.
9.5”
4.5”
1”
(1)100W
Medium Base Bulb
(Not Supplied)
PART NUMBER
NO.
1
G3632SH OPAL ETCHED GLASS 11.25"D 1
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
2of5
REQ.
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-QF1678BN
For Style QF1678BN
STEP 1 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Ceiling Canopy.
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex Nut
(D) onto the Mounting Screws (B). Hand tighten until
snug.
Mounting Screw
Lock Washer
Ceiling
Canopy
Figure 1
Crossbar
Hex Nut
STEP 2 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Outlet Box
Outlet Box
Screw
Mounting Hole
Crossbar
Figure 2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc. June2014
or visit us on-line at www.quoizel.com
3of5
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-QF1678BN
For Style QF1678BN
STEP 3 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
Figure 3
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 4
STEP 4 - Attach Ceiling Canopy to Mounting
Screw
A. Place the Ceiling Canopy on the top of the Fixture Body
(H) over the Mounting Screws (B) and secure with
Mounting Balls (E). Hand tighten until snug.
Fixture Body
Ceiling
Canopy
Figure 5
Mounting Screw
Mounting
Ball
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc. June2014
or visit us on-line at www.quoizel.com
4of5
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-QF1678BN
For Style QF1678BN
STEP 5 attach Shade to Fixture Body-
A. Place the Shade (G) over the Socket, secure by thread
Socket Collar (H) onto Socket. Hand tighten until sung.
STEP 6 Install Bulb-
A. This fixture uses standard bulb with a standard screw base.
Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Figure 6
Socket
Shade
Socket Collar
Figure 7
Socket
STEP 7 - Attach Shade to Fixture Body
A. Place Ribbed Glass Shade (I) over the Side Arm, secure
by threading the Lock Ball (K) onto the Side Arm on the
side of Fixture Body (F), hand tighten until snug.
Lock Ball
Bulb
Fixture Body
Side Arm
Ribbed Glass
Shade
Figure 8
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc. June2014
or visit us on-line at www.quoizel.com
5of5
Loading...