Quoizel Q4574A User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-Q4574A
For Style Q4574A
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (1) Medium Base 150W Maximum
EstimatedAssemblyTime: 15-20 minutes
Preparation:Identify andinspect all partsbefore beginninginstallation. Check package
contentlist anddiagrams below tobe sureall parts arepresent. Ifany parts aremissing
ordamaged, donot attempt toassemble, install,or operate thefixture. Contactcustomer
servicefor replacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
E
F
G
H
I
J
K
L
Package Contents
Description
Support Arm
Shade
Socket Collar
Allen Wrench
Socket Head Cup Screw
Support Rod
Base
Wrench
Small Lock Washer
Small Hex Nut
Big Lock Washer
Big Hex Nut
Quantity
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
A
E
D
B
C
G
H
I
J
F
K
L
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of3
December2011
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-Q4574A
STEP 1 Attach Support Rod to Base-
A. Place the Blots on the end of the Support Rod (F)
through the holes on the Base (G). Secure by threading
Small/Big Lock Washers (I/K) and Small/Big Hex Nuts
(J/L) onto the Bolts. Hand tighten until snug with the
Wrench (H).
For Style Q4574A
Support Rod
Big Hex Nut
Wrench
Figure 2
STEP 2 Attach Support Arm to Support Rod-
A. Place the Neck of the Support Arm (A) into the top end
of the Support Rod (F). By using the Allen Wrench (D),
thread the Socket Head Cup Screw (E) into the
mounting hole on the top end of the Support Rod (F),
attach to the Neck of the Support Arm (A). Hand tighten
until snug.
Small Lock
Washer
Small Hex Nut
Figure 3
Socket Head
Cup Screw
Base
Big Lock Washer
Big Hex Nut
Figure 1
Support Arm
Neck
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2011 Quoizel Inc.
Allen Wrench
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
2of3
Support Rod
December2011
Loading...