Quoizel Q1560BN User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
ToolsRequired:Flatheadscrewdriver,Phillips screwdriver,pliers,wire cutters, wire
strippers,electricaltape,safetyglasses.
BulbRecommended: (1) Medium Base 100W Maximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identifyandinspectallpartsbefore beginning installation. Check package
contentlistanddiagramsbelowto be sure all parts are present. If any parts are missing
ordamaged,donotattempttoassemble, install, or operate the fixture. Contact customer
serviceforreplacementparts.
Assembly Instruction Sheet #IS-Q1560BN
For Style Q1560BN
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Description
Mounting Screw
Lock Washer
Hex Nut
Mounting Ball
Fixture Body
Harp
Finial
Shade
Self-tapping Screw
Wall Anchor
Cord Cover Backplate
Cord Cover
Plug Insert
Short Mounting Screw
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
5 pcs.
5 pcs.
1pc.
2 pcs.
1pc.
2 pcs.
A
B
C
D
E
F
G
H
I
L
J
K
M
N
O
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of7
August2013
Q1560BN
FINISH: BRUSHED NICKEL
26”
2
GND
2.4mm
13Ga
QUOIZEL
12” Dia.
6” Dia.
R
8.5”
6”
18”
1
6”
(1)100W Medium
Base Bulb
(Not Supplied)
PART NUMBER
NO.
1
2
11560BNQ
S1502OW
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE BRUSHED NICKEL Q1560BN
SHADE ROUND BELL OFF WHITE 6"X12"X8.5”
2of7
REQ.
1
1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
For Wall Mount Portable
Assembly Instruction Sheet #IS-Q1560BN
For Style Q1560BN
STEP 1 Mark Points on the Wall-
A. Attach the Crossbar (A) onto the desired location on the
wall surface. Mark two points on the wall surface from
the holes on the Crossbar (A) that you would like to
pass Self-tapping Screws (K).
STEP 2 Install Mounting Screw-
A. Thread the Short Mounting Screws (O) into the holes on
the Crossbar (A). Pass the Lock Washers (C) over the
Short Mounting Screws (O)
onto the screws. Hand tighten until snug.
and thread the Hex Nuts (D)
Crossbar
Mark
Self-tapping
Screw
Figure 1
Crossbar
Lock Washer
Hex Nut
Short Mounting
Screw
STEP 3 Install Inner Backplate-
A. Drill proper holes for Wall Anchors (J) on the marked
points on the wall surface.
B. Insert the Wall Anchors (J) into the drilled holes on the
wall surface. Attach the Crossbar (A) onto the wall
surface. Secure by threading Self-tapping Screws (K)
into the Wall Anchors (J). Hand tighten until snug.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
3of7
Figure 2
Figure 3
Mark
Wall Anchor
Crossbar
Self-tapping
Screw
August2013
Loading...