6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-Q1055FBN
For Style Q1055FBN
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (1) Medium Base 150WMaximum(3-Way)
EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
E
F
G
Package Contents
Description
Harp
Socket Assembly
Finial
Shade
Rod
Panel
Base
Quantity
1pc.
1pc.
1pc.
1pc.
2 pcs.
1pc.
1pc.
C
A
D
B
E
F
G
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc. November2012
or visit us on-line at www.quoizel.com
1of4
Q1055FBN
FINISH: BRUSHED NICKEL
11”
16”Dia.
9”Dia.
2
(1)150W Medium
Base Bulbs
(3-Way)
(Not Supplied)
60.5”
24”
1
10.5”Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
PART NUMBER
NO.
11055FBNQ
1
2
S1266WH
3
REPLACEMENT PART DESCRIPTION
BASE BRSH NIKL Q1055FBN
SHADE WHITE ROUND 9"X16"X11”
2of4
REQ.
1
1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-Q1055FBN
For Style Q1055FBN
STEP 1 Assemble Rod and Socket
-
Assembly
A. Thread the Rod (E) and Panel (F) to the Base (G) as
shown. Hand tighten until snug.
B. Thread the Socket Assembly (B) into the top end of Rod
(E). Hand tighten until snug.
STEP 2 - Assemble Harp
Rod
Panel
Rod
Figure 1
Socket Assembly
A. Locate the Harp (A) by pressing the bottom ends of the
Harp (A) into the Harp Clips.
Harp
Harp Clip
Figure 2
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of4
November2012
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
STEP 3 Assemble Shade-
,.
Assembly Instruction Sheet #IS-Q1055FBN
For Style Q1055FBN
A. Place the center hole on the top of the Shade (D) over
the nipple at the top end of the Harp (A). Secure the
Shade (D) by threading the Finial (C) onto the Harp (A).
Hand tighten until snug.
Finial
Shade
Harp
STEP 4 Install Bulb-
A. This fixture uses standard bulbs (3-Way) with medium
screw bases. Maximum 150 watts.
B. Insert bulb and screw snugly into place.
Your fixture floor lamp is now assembled and ready to
use. Enjoy!
Figure 3
Bulb
Socket
Figure 4
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of4
November2012
Loading...