Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-PLR5009PN
For Style PLR5009PN
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
strippers,electrical tape, safetyglasses.
BulbRecommended: (9) CandelabraBase60W Maximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Description
Nipple
Lock Washer
Hex Nut
Ceiling Canopy
Canopy Chain Loop
Canopy Lock Ring
Fixture Chain
Fixture Loop
Lock Screw
Socket Assembly
Ring
Organza Shade
Socket Collar
Glass Shade
Socket Collar Tool
Quantity
1pc.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
6 pcs.
1pc
1pc.
9 pcs.
9 pcs.
9 pcs.
1pc.
A
F
B
C
D
J
K
L
I
E
G
N
H
M
O
P
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of7
September2013
Page 2
PLR5009PN
FINISH: PALLADIAN BRONZE
2.4mm
13Ga
QUOIZEL
GND
R
1
5" Dia.
1”
Overall Height 126”
(Includes 96” Chain)
NOTE: FOUR LIGHTS SHOWN FOR
ILLUSTRATION PURPOSES ONLY.
31” Dia.
5” Dia.
4”
3” Dia.
3.5”
27.5”
3
2
(9) 60W Candelabra
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
M381CHPN
1
2
3
G3695SH
S1549OH
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
CHAIN PALLADIAN BRONZE 3.8MMX4'
ETCHED GLASS SHADE 3"D
ORGANZA HARDBACK SHADE 5"D
2of7
REQ.
1
9
9
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-PLR5009PN
For Style PLR5009PN
STEP 2 - Attach Ring to Socket Assembly
A. Line up the holes on the Ring (L) to the Mounting Holes
on the side of the Support Arms. Secure by threading
Lock Screws (J) into the Mounting Holes. Hand tighten
until snug with screwdrivers.
STEP 2 - Attach Fixture Loop to Socket
Assembly
A. Thread the Fixture Loop (I) onto the nipple on the top
center of the SocketAssembly (K). Hand tighten until
snug.
Mounting
Hole
Support Arm
Figure 2
Socket
Assembly
Lock Screw
Ring
Figure 1
Fixture Loop
Socket Assembly
STEP 3 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
or visit us on-line at www.quoizel.com
3of7
Mounting
Hole
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
Figure 3
September2013
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-PLR5009PN
For Style PLR5009PN
STEP 4 Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
STEP 5 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (F) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop and hand tighten until snug.(F)
Crossbar
Lock Washer
Hex Nut
Nipple
Figure 4
Outlet Box
Nipple
Crossbar
Hex Nut
Lock Washer
STEP 6 Assemble Ceiling Canopy-
A. Push the Ceiling Canopy (E) upward over the Outlet
Box. Thread the Canopy Lock Ring (G) onto the Canopy
Chain Loop and tighten until snug to secure the
Ceiling Canopy (E).
(F)
Canopy
Chain Loop
Ceiling Canopy
Canopy
Lock Ring
Figure 5
Outlet Box
Canopy Chian Loop
Figure 6
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of7
September2013
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-PLR5009PN
For Style PLR5009PN
STEP 7 Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. Adjust the Fixture Chain (H) to your desired length by
removing the links if needed. You may need to use plier
to open the chain links. If so, put a cloth over the chain
to protect the finish from the pliers.
B. Attach one end of the Fixture Chain (H) onto the
Canopy Chain Loop (F) and then attach the other end of
the Fixture Chain (H) onto the Fixture Loop (I) on the
top of the fixture.
STEP 8 Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (H) alternating links. Push the wires up
through the Canopy Chain Loop (F) into the outlet box.
Figure 7
Canopy Chain Loop
Fixture Chain
Fixture Loop
Supply Wire and
Ground Wire
Canopy Chain
Loop
Fixture Chain
Supply Wire
and Ground Wire
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of7
Figure 8
September2013
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-PLR5009PN
STEP 9 - Make Wire Connections
For Style PLR5009PN
A. Un-thread the Canopy Lock Ring (G) and slide Canopy Lock
Ring (G) and Ceiling Canopy (E) down the Fixture Chain (H).
B. Push all slack fixture wire through Canopy Chain Loop (F)
into Outlet Box. Trim excess fixture wire leaving a minimum
of 6 inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to Ribbed
Side Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Smooth Side Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
G. Re-attach the Ceiling Canopy (E) as shown in Step 6.
White wire from supply
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Ribbed side
wire from fixture
Smooth side
wire from fixture
Supply Wire
and Ground
Wire from
Outlet Box
Supply Wire and
Ground Wire
Canopy Chain Loop
Fixture Chain
Ceiling
Canopy
Canopy Lock Ring
Figure 9
Figure 10
STEP 10 Install Shades-
A. Place the Glass Shade (O) over the Socket and secure by
using the Socket Collar Tool (P) threading the Socket Collar
(N) onto the Socket. Hand tighten until snug.
B. Seat the Organza Shade (M) onto the top edge of the Glass
Shade (O).
Organza Shade
Socket Collar Tool
Socket Collar
Glass Shade
Socket
Figure 11
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of7
September2013
Page 7
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-PLR5009PN
For Style PLR5009PN
STEP 11 - Install Bulb
A. This fixture uses candelabra bulbs with a standard
screw base. Maximum 60 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Bulb
Socket
Figure 12
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
7of7
September2013
Loading...