6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-PIE8701PN
For Style PIE8701PN
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
strippers,electrical tape, safetyglasses.
BulbRecommended: (1) CandelabraBase60W Maximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
A
Part
A Crossbar
B
C
D
E
F
G
H
I
Description
Nipple
Lock Washer
Hex Nut
Rubber Washer
Mounting Ball
Fixture Body
Big glass
Small glass
Quantity
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
G
B
C
D
E
H
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
F
Thank youfor purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of5
I
July2013
PIE8701PN
FINISH: PALLADIAN BRONZE
5”
3.5”Dia.
GND
2.4mm
13Ga
QUOIZEL
R
16”
12.5”
7.5”
3”Dia.
5”
8.0000
2
1
(1) 60W Candelabra
Base Bulbs
(No Supplied)
PART NUMBER
NO.
1
2
G3608CY
G3609CY
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
GLASS CYLINDER INNER PIE8701PN
GLASS CYLINDER OUTER PIE8701PN
2of5
REQ.
1
1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-PIE8701PN
For Style PIE8701PN
STEP 1 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
STEP 2 Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Figure 1
Mounting
Hole
Lock Washer
Outlet Box
Crossbar
Outlet Box Screw
(not Supplied)
Crossbar
Hex Nut
Figure 2
Nipple
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of5
July2013
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-PIE8701PN
For Style PIE8701PN
STEP 3 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
Figure 3
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 4
STEP 4 - Attach Fixture Body to Nipple
A. Place the Backplate of the Fixture Body (G) and Rubber
Washer (E) over the Nipple (B) and secure with the
Mounting Ball (F). Hand tighten until snug.
Figure 5
Fixture
Body
Backplate
Rubber Washer
Nipple
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
Outlet Box
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of5
Mounting
Ball
July2013
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-PIE8701PN
For Style PIE8701PN
STEP 5 - Install Bulb
A. This fixture uses standard bulbs with a standard screw base.
Maximum 60 watts.
B. Insert bulb and screw properly into place.
STEP 6 Attach Shade to Fixture-
Figure 6
Bulb
Socket
Small Shade
A. Place Small Shade (I) into Upper Shade Holder on the
Fixture Body (G) properly. Big Shade (H) into Lower Shade
Holder on the Fixture Body (G) properly.
Your fixture is now assembled and ready to use.
Enjoy!
Upper Shade
Holder
Lower Shade
Holder
Big Shade
Figure 7
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 QuoizelInc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of5
July2013
Loading...