Quoizel OZ1713IN User Manual
Assembly Instruction Sheet #IS-OZ1713
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC 29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject
glass parts to any shock while in operation or shattering may result.
,.
For Styles OZ1713PN, C and IOZ1713 OZ1713 N
ToolsRequired: Flatheadscrewdriver, Phillipsscrewdriver,pliers,wire cutters, wire strippers, electricaltape,
safetyglasses.
BulbRecommended: (2) MediumBase 100W Maximum,Alternatebulb (2) 23W CFL
EstimatedAssembly Time:30-45minutes
Preparation:Identify and inspect all partsbeforebeginning installation. Check package contentlist and diagrams
belowto be sure all partsarepresent. If any parts aremissing or damaged, do not attemptto assemble, install, or
operatethe fixture. Contact customer serviceforreplacement parts.
Package Contents
Allen Bolt
C
x3
Fixture Body
A
x1
Lock Ball
B
x2
STEP 1 Install Crossbar-
A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head
of the Green Ground Screw facing you. Secure it with Outlet Box
Screws (not included) Tighten until snug
..
Outlet Box
AA
Outlet Box Screw
(not included)
Green Ground Screw
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. (Connectors are not included with fixture.) Strip and
prepare wire ends according to instructions supplied with
connectors.
B. Connect White Supply Wire from the Outlet Box to Ribbed side
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth
side Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground Wire from
fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Rubber
D
Washer
x3
Flat Washer
E
x6
F
Figure 1
Shade
x1
2.4mm
Hardware Contents
13Ga
QUOIZEL
GND
R
White wire
from supply
Black wire from
supply (or Red)
Ground wire
from supply
STEP 3 Attach Fixture Body to
-
Mounting Screw
A. Place the Ceiling Canopy of the
Fixture Body (A) over the
Mounting Screws and secure
with Lock Ball (B). Hand tighten
until snug.
STEP 4 Install Shade-
A. Place the Rubber Washer (D) and Flat Washers (E) over the Allen
Bolt (C).
B. Place the Shade (F) into the shade holder, line up the holes on the
side of the Shade (F) and the mounting holes on the Ball. Pass the
Allen Bolts (C) with washers
(D/E) through the holes on the
Shade (F), thread into the
mounting holes on the Balls by
using the Allen Wrench (BB).
Please make sure that theAllen
Bolts (C) don’t penetrate
opening of the Ball, this will allow
the support arms to pass through
the Ball to attach the Shade (F)
to the Fixture Body (A).
Figure 4
Crossbar Assembly
AA
x1
Ribbed side wire
from fixture
Smooth side wire
from fixture
Ground wire
from fixture
A
Allen Wrench
BB
x1
Mounting Screw
Ceiling Canopy
B
BB
C
Figure 2
Figure 3
A
E
F
Ball
D
2014 Quoizel Inc.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
1of2
March2014
STEP 5 - Install Bulb
A. standard bulb with a medium screw baseThis fixture uses .
Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use. Enjoy!
OZ1713PN/OZ1713C/OZ1713IN
FINISH: PALLADIAN BRONZE
/POLISHED CHROME
/IRON GATE
GND
2.4mm
13Ga
QUOIZEL
R
1
2
Bulb
Socket
Figure 6
5”Dia.
1.5”
3
9.5”
4”
12”Dia.
13”Dia.
(2) 100W
(Not Supplied)
NO.
1
2
1
2
Medium
Base
Bulbs
PART NUMBER
8598KIT
G2236SH
9194KIT
G2236SH
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
KIT POLISHED CHROME HARDWARE
SHADE ETCHED PAINTED WHITE INSIDE 12”D
MOUNTINGHARDWAREIRONGATE4"D 1
SHADE ETCHED PAINTED WHITE INSIDE 12”D
3 11713INOZ BASE IRON GATE OZ1713IN 1
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2014 Quoizel Inc.
or visit us on-line at www.quoizel.com
2of2
REQ.
1
1
1
ITEM NUMBER
OZ1713C
OZ1713IN
March2014
Loading...