Quoizel NN8311WT User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS NN8309STYLE NUMBER NN8309WT,NN8311WT:
PACKAGE CONTENTS
Part
Inner Backplate
A
Shade
B
Fixture Body
C
Lock Screw
D
!
WARNINGS AND CAUTIONS
Description
Quantity
1pc
1pc
1pc
2pcs
ISSUED 08-2009 Revised 2009-11-19
A
C
B
D
WARNING:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time: 20 30 minutes
● Tools Required forAssembly (not included): Flathead screwdriver Phillips screwdriver, pliers, electrical
tape, wire cutters, safety glasses &1, 100 Watt Type - A Medium Base Bulb.
,
,
● Helpful Tools (not included): Wire Strippers.
INSTALLATION INSTRUCTIONS
STEP 1:
a Secure the Inner Backplate to the Outlet Box with Outlet Box
.
Screws as shown Tighten until snug.
.
Outlet Box
1OF3
Outlet Box
Screw
Inner Backplate
INSTALLATION INSTRUCTIONS
STEP 2:
*().
Use Wire Connectors not supplied to connect the wires
.
a Connect the House Ground Wire to the Fixture Ground Wire.
.
b Connect the House White Wire to the Fixture Supply Wire
()
White or Ribbed Side .
.()
c Connect the House Black or Red Wire to the Fixture Supply
().
Wire Black or Smooth Side
.
d Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the Outlet Box
.
WHITE WIRE
FROM HOUSE
BLACK OR RED WIRE()
FROM HOUSE
GROUND WIRE
FROM HOUSE
STEP 3:
a. Place the Backplate over the Inner Backplate and match the
holes on the edge of the Backplate onto the Mounting Holes on
the folded edge of the Inner Backplate
b. Using pliers thread Lock Screws into the Mounting Holes on
,
the folded edge of the Inner Backplate and hand tighten until
snug to secure the Fixture Body
.
.
Lock Screw
STYLE NUMBER NN8309WT,NN8311WT:
WHITE OR RIBBED
FROM FIXTURE
BLACK OR SMOOTH
FROM FIXTURE
GROUND WIRE
FROM FIXTURE
Inner
Backplate
Backplate
STEP 4:
a. Install the correct Bulb referring to fixture markings and/or labels for maximum wattage.
STEP 5:
a. Place the Shade inside of the Fixture Body as shown in the
illustration.
Fixture Body
Shade
2OF3
Fixture Body
Loading...