Quoizel NL8601BN User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS NL8601:STYLE NUMBER NL8601C, NL8601HO,NL8601BN:
PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
Crossbar
Green Ground Screw
Nipple
Lock Washer
Hex Nut
Lock Ball
Socket Collar
Fixture Body
Shade
Description
Quantity
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
ISSUED 09-2009 REVISED 2011-03-04
A
B
C
H
D
E
F
G
I
!
WARNINGS AND CAUTIONS
WARNING:
●
Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTION:
●
These instructions are provided for your safety. It is very important that they are read completely before
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
●
Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
●
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
●
Estimated Assembly Time : 20 30 minutes
●
Tools Required for Assembly (not included) : Flathead Screwdriver Phillips Screwdriver, Pliers,
Electrical Tape, Wire Cutters, Safety Glasses & 1, 100 Watt, Type - A Medium Base Bulb.
●
Helpful Tools (not included) : Wire Strippers.
,
1OF3
INSTALLATION INSTRUCTIONS
STEP 1:
a Secure the Crossbar onto the Outlet Box with Outlet Box
.
Screws Tighten until snug
..
STEP 2:
*.
Pliers is required on this step
..
a Thread the Hex Nut onto one end of the Nipple
.
b Place the Lock Washer over the hex nut end of the
Nipple and then thread the Nipple into the center lock
hole of the Crossbar
.,
c Using pliers thread the Hex Nut against the Crossbar
and hand tighten until snug
.
STYLE NUMBER NL8601C, NL8601HO,NL8601BN:
Outlet Box
Crossbar
Outlet Box
Screw
Crossbar
.
Hex Nut
Lock Washer
Nipple
STEP 3:
*()
Use Wire Connectors not supplied to connect the
.
wires
.
a Connect the House Ground Wire to the Fixture Ground
WHITE OR RIBBED
FROM HOUSE
Wire.
.()
b Connect the House White or Ribbed Wire to the
Fixture Supply Wire White or Ribbed Side .
.()
c Connect the House Black or Red Wire to the Fixture
Supply Wire Black or Smooth Side
.
d Wrap each connection with approved electrical tape and
().
()
carefully stuff all of the connected wires into the Outlet
.
Box
BLACK OR RED WIRE()
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
STEP 4:
a Place the Backplate over the Outlet Box as shown. Secure
.
by threading the Lock Ball onto the Nipple. Hand tighten
until snug.
WHITE OR RIBBED
FROM FIXTURE
BLACK OR SMOOTH
FROM FIXTURE
Backplate
Nipple
2OF3
Lock Ball
Outlet Box
Loading...