Quoizel MY8801ML User Manual

INSTALLATION INSTRUCTIONS

6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com

OUTLET BOX

..

UNIVERSAL
CROSSBAR

,.

BACKPLATE

(2) OUTLET
BOX SCREWS
(not supplied)

LOCK SCREW with
PLASTIC WASHER

(2)MOUNTING BALLS

1. Before beginning the installation, carefully unpack and identify all
parts referring to illustration.

,

2 Turn the electrical power to installation point OFF at circuit

.

breaker

3

.

Place the CROSSBAR on the BACKPLATEand align the holes in

.

the BACKPLATEwith a set of threaded holes in the CROSSBAR.
Install the (2) MOUNTING SCREWS in the aligned threaded holes
on the CROSSBAR. Next, mount the CROSSBAR to the outlet

box with (2)OUTLETBOX SCREWS (not provided).

4. :

Make the connections

Use wire connectors(not supplied) connect the HOUSE GROUND

to theFIXTURE GROUNDWIRE attach the HOUSE WHITE

;

WIRE to FIXTURE WHITE (or RIBBED SIDE) SUPPLYWIRE;
connect the HOUSE BLACK(or RED) WIRE to the FIXTURE
BLACK(or SMOOTH SIDE) WIRE. Wrap each connection with
approved electrical tape.

5. Carefully tuck all wires into the WALLMOUNTED OUTLET BOX

and position the fixture over the outlet box.Align the HOLES in the
BACKPLATE with the 2 MOUNTING SCREWSattached to the

()

UNIVERSAL CROSSBAR. Pass the fixture over the

2 MOUNTING SCREWS and secure against by threading

()

2 MOUNTING BALLSonto end of screw.Tightenuntil snug.

()

(2) MOUNTING SCREWS

FIXTURE SUPPLY WIRE

and GROUND WIRE

IF IN DOUBT ABOUT ELECTRICAL INSTALLATION,
CONSULT A LICENSED ELECTRICIAN!

SOCKET

NIPPLE

CAP

FINIAL

SHADE

6. Position the SHADE and match the holes on the side with the

mounting holes on the tabs on the side of the BACKPLATE

.

Secure the SHADE by threading the LOCK SCREW with
PLASTIC WASHERS into the mounting holes and hand tighten
until snug

7 Locate the CAP over the end of the NIPPLE attaching to the

.,

bottom of the SHADE and secure with the FINIAL Hand
tighten until snug

.

.

.

8. Install the correct bulbs referring to the fixture markings and/or
labels for maximum wattage.

9 Restore power to the installation point ON. Retain this sheet for

.

future reference.

IS MY8801
2007-09 15--