Quoizel MY6325ML User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS MY6325STYLE NUMBER MY6325ML:
PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
J
K
Finial
Cap
Hex Nut
Flat Washer
Plastic Washer
Shade Holder
Check Ring
Spacer Tube
Nipple with Hex Nut
Shade
Base
Description
Quantity
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
ISSUED 09 2009-
A
B
C
D
E
F
G
H
I
J
K
!
CAUTIONS
These instructions are provided for your safety. It is very important that they are read completely before
●
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
●
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
●
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
EstimatedAssembly Time : 15 30 minutes
●
Tools Required forAssembly (not included) : (3) 60W Type - A Medium Base Bulbs.
●
-
1 OF 2
INSTALLATION INSTRUCTIONS
STYLE NUMBER MY6325ML:
STEP 1:
a Place the Base onto a flat working surface.
.
b. Screw the Hex Nut end of the Nipple into the Hex Coupling on
the top center of the Base. Using pliers, thread the Hex Nut
against the Hex Coupling and hand tighten until snug.
c. Pass the following components over the top end of the Nipple
in turn:
Spacer Tube, Check Ring, Shade holder, Shade, Plastic
Washer and Flat Washer.
Secure them by threading the Hex Nut onto the top end of the
Nipple. Tighten gently until snug.
Hex Nut
Plastic Washer
Shade Holder
Spacer Tube
Hex Coupling
Base
Flat Washer
Shade
Socket Assembly
Check Ring
Nipple with
Hex Nut
STEP 2:
a Pass the Cap over the top end of the Nipple and secure with
.
the Finial. Hand tighten until snug.
Cap
STEP 3:
a Install correct Bulbs referring to fixture markings and/or labels for maximum wattage.
.
Your installation is completed now. Restore electricity. Keep this sheet for future reference.
Finial
Nipple
2 OF 2
Loading...