Quoizel MY1618ML User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS MY1618:STYLE NUMBER MY1618ML:
PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Crossbar
Green Ground Screw
Mounting Screws
Lock Washer
Hex Nut
Mounting Ball
Hex Nut
Shade Stop
Ceiling Canopy
Shade
Check Ring
Stem with Hex Nut
Spacer Tube
Plastic Washer
Flat Washer
Cap
Finial
Description
Quantity
1pc
1pc
2pcs
2pcs
2pcs
2pcs
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
1pc
ISSUED 09-2009 Revised 2010-01-19
K
A
B
N
C
D
E
F
G
H
I
O
Q
L
M
P
!
WARNINGS AND CAUTIONS
WARNING:
●
Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTION:
●
These instructions are provided for your safety. It is very important that they are read completely before
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
●
Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
●
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
●
Estimated Assembly Time : 20 30 minutes
●
Tools Required for Assembly (not included) : Flathead Screwdriver Phillips Screwdriver, Pliers,
Electrical Tape, Wire Cutters, Safety Glasses &4, 60 Watt, Type - A Medium Base Bulbs.
●
Helpful Tools (not included) : Wire Strippers.
J
,
1OF3
INSTALLATION INSTRUCTIONS
STYLE NUMBER MY1618ML:
STEP 1:
a Screw the Mounting Screws into the Crossbar place the
.,
Mounting Screw
Crossbar
Lock Washers over the Mounting Screws and thread the
Hex Nuts onto the Mounting Screws as shown Secure the
.
position of the Mounting Screws by tightening the Hex Nuts
against the Crossbar
b Secure the Crossbar to the Outlet Box with Outlet Box
.
Screws
.
.
Outlet Box
Outlet Box Screw
STEP 2:
a Locate the Ceiling Canopy onto the Crossbar and slip the
.
Button Stop on the end of Lanyard into the Slot on the
Crossbar as shown.
Crossbar
Ceiling Canopy
Slot
Hex Nut
Lock Washer
Button Stop
Lanyard
STEP 3:
*()
Use Wire Connectors not supplied to connect the
.
wires
.
a Connect the House Ground Wire to the Fixture Ground
WHITE OR RIBBED
FROM HOUSE
Wire.
.()
b Connect the House White or Ribbed Wire to the
Fixture Supply Wire White or Ribbed Side .
.()
c Connect the House Black or Red Wire to the Fixture
Supply Wire Black or Smooth Side
.
d Wrap each connection with approved electrical tape and
().
()
carefully stuff all of the connected wires into the Outlet
.
Box
BLACK OR RED WIRE()
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
STEP 4 :
a Place the Ceiling Canopy onto Outlet Box aligning 2
.
holes in the Ceiling Canopy with 2 Mounting screws
threaded on the Crossbar and secure it against wall
with Mounting Balls
.
Mounting
Screw
Mounting Ball
WHITE OR RIBBED
FROM FIXTURE
BLACK OR SMOOTH
FROM FIXTURE
Outlet Box
Ceiling
Canopy
2OF3
Loading...