Quoizel MY1404ML User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS-MY1404
STYLE NUMBER: MY1404ML
PACKAGE CONTENTS
PART
A Crossbar
B
C
D
E
F
G
H
I
J
K
DESCRIPTION
Green Ground Screw
Nipple
Hex Nut
Lock Washer
Knurled Nut
Mounting Ball
Shade
Socket Collar
Socket Collar Tool
Fixture Body
QUANTITY
1pc
1pc
1pc
2pcs
2pcs
1pc
1pc
4pcs
4pcs
1pc
1pc
ISSUED 12-2010 REVISED 2011-03-21
A
B
C
D
E
F
G
K
H
I
J
WARNINGS AND CAUTIONS
WARNING:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching
off the circuit breaker or removing the fuse.
CAUTION:
● These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb9s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (4) 100W A19 Medium Base bulbs
● Helpful Tools (not included): Wire strippers.
.
1OF3
INSTALLATION INSTRUCTIONS
STEP 1:
a. Secure the Crossbar to the Outlet Box with Outlet Box
Screws. Hand-tighten until snug.
STEP 2:
Pliers is required on this step.
a. Thread one Hex Nut onto top end of the Nipple.
b. Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of
the Crossbar.
c. Using pliers, thread the Hex Nut against the Crossbar
and hand-tighten until snug.
Crossbar
STYLE NUMBER: MY1404ML
Outlet Box
Crossbar
Outlet Box Screw
Lock Washer
Hex Nut
STEP 3:
Install the Lanyard.
The purpose of the lanyard is to provide the installer a
means to support the fixture from the junction box while
connecting the electrical wires. This enables the fixture
to hang from the junction box and your hands are free
to make the wire connections.
TurntheButtonStopsoitmaybeinsertedintothe
a.
Crossbar slot. Make sure the Button Stop is completely
inside the Crossbar. Slowly release the fixture to make
sure it is supported by the Button Stop.
.
b Proceed to Step 4 for the wiring steps.
.
c Once you are complete with the wiring there is nothing
to do with Lanyard. The Lanyard will push into the
Outlet Box when the fixture is placed for final mounting.
Nipple
Outlet Box
Crossbar
Slot
Botton Stop
Lanyard
Ceiling Canopy
2OF3
Loading...