Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-MRE1506WT
For Style MRE1506WT
ToolsRequired: Flathead screwdriver,Phillips screwdriver,pliers, wire cutters,wire
strippers,electrical tape, safetyglasses.
BulbRecommended: (1) Medium Base100WMaximum(supplied)
EstimatedAssemblyTime:20-30 minutes
Preparation:Identify and inspectallparts before beginninginstallation.Check package
contentlist and diagramsbelowto be sureallparts are present.Ifany parts aremissing
ordamaged, do notattemptto assemble, install,oroperate the fixture.Contactcustomer
servicefor replacement parts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
Description
Nipple
Lock Washer
Hex Nut
Ceiling Canopy
Fixture Chain
Fixture Loop
Canopy Chain Loop
Canopy Lock Ring
6” Rod
12” Rod
Socket Assembly
Bulb
Quantity
1pc.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
A
B
C
D
E
F
G
I
J
K
L
M
H
Thank youfor purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. August2013
or visit us on-line at www.quoizel.com
1of6
Page 2
MRE1506WT
FINISH: WESTERN BRONZE
6”
3
2.4mm
R
QUOIZEL
13Ga
GND
12”
6” Dia.
1”
52”
2
OVERALL HEIGHT INCLUDES
(2) 6” AND 12” RODS
(1)100W
Medium Base Bulb
(Supplied)
PART NUMBER
NO.
1
2
3
I1101EC
9012EXWT
9006EXWT
6” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
REPRODC 60W 1910 INCANDESCENT BULB
ROD EXT WESTERN BRONZE 12"L X 0.5"D
ROD EXT WESTERN BRONZE 6"L X 0.5"D
2of6
1
12”
8”
REQ.
1
2
2
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-MRE1506WT
For Style MRE1506WT
STEP 1 Remove Cage from Socket Assembly-
A. Remove Cage from Socket Assembly by unlocking Lock
Ball.
STEP 2 Assemble Rods-
A. Determine the Rods (G/H) to be assembled to the Socket
Assembly (I) according to your hanging height.
B. Pass Supply Wires and Ground Wire through the chosen
Rods (G/H) and then thread the chosen Rods (G/H) and
the Socket Assembly (I) together. Hand tighten until snug.
Figure 2
Socket
Assembly
Lock Ball
Cage
Figure 1
6” Rod
6” Rod
12” Rod
12” Rod
Supply Wire and
Ground Wire
STEP 3 Assemble to Upper Rod- Fixture Loop
A. Pass Supply Wires and Ground Wire through the Fixture
Loop (G) then thread the Fixture Loop (G) and the Upper
Rod together. Hand tighten until snug.
STEP 4 - Attach Crossbar to Outlet Box
A. Secure the Crossbar (A) to the outlet box with outlet
box screws (not supplied). Tighten until snug.
Figure 3
Figure 4
Mounting
Hole
Socket
Assembly
Fixture Loop
Supply Wire and
Ground Wire
Upper Rod
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. August2013
or visit us on-line at www.quoizel.com
3of6
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-MRE1506WT
For Style MRE1506WT
STEP 5 Attach Nipple to Crossbar-
A. Thread one Hex Nut (D) onto the top end of the Nipple
(B).
B. Place one Lock Washer (C) over the top end of the
Nipple (B) and then thread the Nipple (B) into the center
lock hole of the Crossbar (A).
C. Using pliers, thread the Hex Nut (D) against the
Crossbar (A) and hand tighten until snug.
Crossbar
Lock Washer
Hex Nut
Nipple
Figure 5
STEP 6 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (D) onto the end of the Nipple
(B).
B. Place the Lock Washer (C) over the end of the Nipple
(B) and then thread the Canopy Chain Loop (H) onto the
end of the Nipple (B).
C. Using pliers, thread the Hex Nut (D) against the
Canopy Chain Loop and hand tighten until snug.(H)
STEP 7 Assemble Ceiling Canopy-
A. Push the Ceiling Canopy (E) upward over the Outlet
Box. Thread the Canopy Lock Ring (I) onto the Canopy
Chain Loop and tighten until snug to secure the
Ceiling Canopy (E).
(H)
Outlet Box
Nipple
Crossbar
Hex Nut
Lock Washer
Canopy
Chain Loop
Figure 6
Outlet Box
Canopy Chian Loop
Ceiling Canopy
Figure 7
Canopy
Lock Ring
STEP 8 Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. Attach one end of the Fixture Chain (F) onto the Canopy
Chain Loop (H) and then attach the other end of the
Fixture Chain (F) onto the Fixture Loop on the top of the
fixture.
Fixture Loop
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. August2013
or visit us on-line at www.quoizel.com
4of6
Canopy Chain Loop
Fixture Chain
Supply Wire and
Ground Wire
Figure 8
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-MRE1506WT
For Style MRE1506WT
STEP 9 Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires and Ground Wire up through the
Fixture Chain (F) alternating links. Push the wires up
through the Canopy Chain Loop (H) into the outlet box.
and Ground Wire
STEP 10 - Make Wire Connections
A. Un-thread the Canopy Lock Ring (I) and slide Canopy Lock
Ring (I) and Ceiling Canopy (E) down the Fixture Chain.
B. Push all slack fixture wire through Canopy Chain Loop into
Outlet Box. Trim excess fixture wire leaving a minimum of 6
inch. Hanging out of the Outlet Box.
C. Use standard wire connectors to make all wire connections.
(Connectors are not included with fixture.) Strip and prepare
wire ends according to instructions supplied with connectors.
D. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
E. Connect Black (or Red) Supply Wire from the Outlet Box to
Black Wire from fixture.
F. Connect Ground Wire from the Outlet Box to Ground Wire
from fixture.
G. Twist connectors until wires are tightly joined together.
H. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
I. Re-attach the Ceiling Canopy (E) as shown in Step 6.
Supply Wire
Supply Wire
and Ground
Wire from
Outlet Box
Canopy Lock Ring
Canopy Chain
Loop
Fixture Chain
Figure 9
Supply Wire and
Ground Wire
Canopy Chain
Loop
Ceiling
Canopy
Fixture Chain
Figure 10
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 11
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. August2013
or visit us on-line at www.quoizel.com
5of6
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-MRE1506WT
For Style MRE1506WT
STEP 11 - Install Bulb
A. This fixture uses standard bulb (supplied) with a standard
screw base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
STEP 12 - Attach Cage to fixture
A. Pass the Bolt on the top of Cage though the Hole on the
Fixture Hood, secure by thread the Lock Ball onto the
Bolt on the top of Cage. Hand tighten until snug.
Figure 12
Socket
Bulb
Figure 13
Lock Ball
Hole
Fixture Hood
Bolt
Cage
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2013 Quoizel Inc. August2013
or visit us on-line at www.quoizel.com
6of6
Loading...