
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS MC843C:STYLE NUMBER MC843CRC:
PACKAGE CONTENTS
Part
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
Crossbar
Green Ground Screw
Mounting Screws
Lock Washer
Hex Nut
Mounting Ball
Lock Screw
Steel Washer
Finial
Nipple with Hex Nuts
6” Rod
12” Rod
Ceiling Canopy
Glass Panel
Acryl Panel
Decorative Shade
Mica Shade Assembly
Description
Quantity
1pc
1pc
2pcs
2pcs
2pcs
2pcs
2pcs
2pcs
1pc
1pc
2pcs
2pcs
1pc
1pc
1pc
1pc
1pc
ISSUED 08-2009 Revised 2010-02-09
M
A
B
C
D
E
F
G
H
N
O
P
!
WARNINGS AND CAUTIONS
WARNING:
●
Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by
switching off the circuit breaker or removing the fuse.
CAUTION:
●
These instructions are provided for your safety. It is very important that they are read completely before
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
●
Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
I
J
Q
K
L
Before beginning installation of product, make sure all parts are present. Compare parts with package
●
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
●
Estimated Assembly Time : 20 30 minutes
●
Tools Required for Assembly (not included) : Flathead Screwdriver Phillips Screwdriver, Pliers,
,
Electrical Tape, Wire Cutters, Safety Glasses &3, 75 Watt, Type - A Medium Base Bulbs.
●
Helpful Tools (not included) : Wire Strippers.
1OF5

INSTALLATION INSTRUCTIONS
STEP 1:
a. Determine the Rods to be assembled according to your
desired hanging height.
b. Pass the Supply Wires with Ground Wire through the
chosen Rods and then thread Rods and Mica Shade
Assembly together as shown. Tighten until snug.
STYLE NUMBER MC843CRC:
6” Rod
6” Rod
12” Rod
12” Rod
Supply Wires with
Ground Wire
Mica Shade
Assembly
STEP 2:
..a Pass the Supply Wires with Ground Wire through the
Swivel and Ceiling Canopy.
b Thread the Swivel onto the top end of the Upper Rod and
hand tighten until snug.
STEP 3:
a Screw the Mounting Screws into the Crossbar place the
.,
Lock Washers over the Mounting Screws and thread the
Hex Nuts onto the Mounting Screws as shown Secure the
position of the Mounting Screws by tightening the Hex Nuts
against the Crossbar
b Secure the Crossbar to the Outlet Box with Outlet Box
.
Screws
.
.
.
Outlet Box
Swivel
Supply Wire with
Ground Wire
Upper Rod
Mounting Screw
Crossbar
Outlet Box Screw
Ceiling Canopy
Hex Nut
Lock Washer
2OF5