Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-MC842FRC
For Style MC842FRC
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:None
BulbRecommended: (2) Medium Base 60W Maximum
EstimatedAssemblyTime:15-20 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Part
A
B
C
D
E
F
G
H
I
J
K
Package Contents
Description
Socket Assembly
Rod
Diffuser
Shade
Connector
Finial
Nipple with Hex Nut
Check Ring
Spacer Tube
Base
Rubber Washer
Quantity
1pc.
3 pcs.
1pc.
1pc.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
1pc.
C
A
D
B
G
H
F
E
J
I
K
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
1of4
September2011
Page 2
MC842FRC
FINISH: RENAISSANCE COPPER
16” Dia.
3
2
60”
7.5”
4
1
(2) 60W Medium
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
1842FRCMC
1
2
3
4
G2907DI
M2294FIRC
S1348MC
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE MC842FRCRENAISSANCE COPPER
DIFFUSER FROSTED GLASS 13"D
FINIAL 0.9"DRENAISSANCE COPPER
SHADEMICA17"DX8"H
2of4
11.5” Dia.
REQ.
1
1
1
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-MC842FRC
For Style MC842FRC
STEP 1 - Assemble Socket Assembly, Rods,
Connectors and Base
A. Thread the Socket Assembly, Rods, Connectors and
Base together as shown. Hand tighten until snug.
Figure 1
Socket
Assembly
Rod
Rod
Connector
Connector
Rod
Base
STEP 2 - Attach Nipple with Hex Nut
A. Thread the Nipple with Hex Nut (G) into the Hex
Coupling on the top center of the Socket Assembly (A).
Using pliers, thread the Hex Nut against the Hex
Coupling and hand tighten until snug.
Figure 2
Nipple with
Hex Nut
Hex Coupling
Socket
Assembly
Thank you for purchasinga Quoizel product.
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2011 Quoizel Inc. September2011
or visit us on-lineat www.quoizel.com
3of4
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-MC842FRC
For Style MC842FRC
STEP 3 - Attach Spacer Tube, Check Ring,
Shade and Diffuser
A. Place the Spacer Tube (I), the Check Ring (H), the
Shade (D) , the Diffuser (C) and the Rubber Washer (K)
over the top end of the Nipple with Hex Nut (G) in turn.
Secure by threading the Finial (F) onto the Nipple. Hand
tighten until snug.
STEP 4 Install Bulb-
A. This fixture uses standard bulb with medium base .
Maximum 60 watts.
B. Insert bulb and screw snugly into place.
Finial
Rubber Washer
Diffuser
Shade
Check Ring
Spacer Tube
Nipple with Hex Nut
Figure 3
Figure 4
Your floor lamp is now assembled and ready to use.
Enjoy!
Bulb
Socket
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2011 Quoizel Inc.
Thank you for purchasinga Quoizel product.
or visit us on-lineat www.quoizel.com
4of4
September2011
Loading...