6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
,.
Assembly Instruction Sheet #IS-LNG8407CHB
For Style LNG8407CHB
ToolsRequired:Flatheadscrewdriver,Phillips screwdriver,pliers,wirecutters,wire
strippers,electricaltape,safetyglasses.
BulbRecommended: (1) Medium Base 100W Maximum
EstimatedAssemblyTime:20-30 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
A
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
Description
Mounting Screw
Lock Washer
Hex Nut
Knob
Tab
Fixture Body
Shade
Shade Frame
Lock Screw
Quantity
1pc.
2 pcs.
2 pcs.
2 pcs.
4 pcs.
4 pcs.
1pc.
1pc.
1pc.
4 pcs.
B
C
D
E
F
G
H
I
J
Thank you for purchasinga Quoizel product.
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc. May2012
or visit us on-lineat www.quoizel.com
1of6
LNG8407CHB
FINISH: CHOCOLATE BRONZE
6.5"
1
8"
7"
9.5"
GND
2.4mm
13Ga
QUOIZEL
R
7"
2
(1)100W A19
Medium Base Bulb
(Not Supplied)
PART NUMBER
NO.
3.5" Sq.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
REQ.
18407CHBLNG
1
2
G2962SH
BASE CHOCOLATE BRONZE LNG8407CHB
SHADE ART/CLEAR WATER SEEDY
2of6
1
1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-LNG8407CHB
For Style LNG8407CHB
STEP 1 - Attach Mounting Screws, Lock
Washers and Hex Nuts to Crossbar
A. Line up a set of holes on the Crossbar (A) and Holes on
the Backplate of the Fixture Body (G).
B. Thread Mounting Screws (B) into the holes on the
Crossbar (A), pass Lock Washers (C) and thread Hex
Nut (D) onto the Mounting Screws (B). Hand tighten
until snug.
STEP 2 - Attach Crossbar to Outlet Box
A. Attach the Crossbar (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the
Mounting Holes on the Outlet Box. Tighten until snug.
Mounting
Screw
Crossbar
Hex Nut
Backplate
Lock Washer
Outlet
Box
Fixture
Body
Figure 1
Crossbar
Mounting
Hole
Outlet Box
Screw
Figure 2
Thank you for purchasinga Quoizel product.
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc. May2012
or visit us on-lineat www.quoizel.com
3of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-LNG8407CHB
For Style LNG8407CHB
STEP 3 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Figure 3
Ground wire from supply Ground wire from fixture
Figure 4
STEP 4 - Attach Fixture Body to Mounting
Screw
A. Place the Backplate of the Fixture Body (G) over the
Mounting Screws (B) and secure with knobs (E). Hand
tighten until snug.
Mounting Screw
Backplate
Fixture Body
Knob
Figure 5
Thank you for purchasinga Quoizel product.
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc. May2012
or visit us on-lineat www.quoizel.com
4of6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-LNG8407CHB
For Style LNG8407CHB
STEP 5 - Attach Shade to Shade Frame
A. Place the Shade (H) into the Shade Frame (I) properly,
Place the Tab (F) pinned the Shade (H)
Flathead screwdriver, thread the (J) nto the
lock hole of Tab on the top of Shade Frame
Shade (H). ighten until snug.
T
.Byusingthe
Lock screw i
to secure the
STEP 6 Attach Shade Frame to Fixture Body-
A. Pass the Hole of the Shade Frame (I) onto Bolt of
Fixture Body (G). Thread the knobs (E) into the Bolt and
hand tighten until snug to secure the Shade Frame(I)
and the Fixture Body (G) together.
Lock screw
Tab
Shade
Tab
Shade Frame
Figure 6
Fixture Body
Bolt
Hole
Shade Frame
Knob
Figure 7
STEP 7 Install Bulb-
A. This fixture uses standard bulb with a standard screw
base. Maximum 100 watts.
B. Insert bulb and screw snugly into place.
Bulb
Thank you for purchasinga Quoizel product.
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc. May2012
or visit us on-lineat www.quoizel.com
5of6
Socket
Figure 8
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-LNG8407CHB
For Style LNG8407CHB
STEP 8 Apply Silicone Sealer to Mounting
-
Balls
A. To prevent moisture from entering the wire
compartment, apply a small amount of silicone sealer
(not included) to the threaded side of the knobs (E) and
then install them onto the mounting screws (B). Wipe
off excess caulk.
STEP 9 Apply Silicone Sealer to Backplate-
A. Make sure exterior wall surface and fixture backplate
are free of dirt before applying caulk. Using exterior
grade caulk, start on one side of fixture backplate and
follow contour, where the fixture backplate meets the
exterior wall surface upward. Proceed to caulk over top
of backplate and down other side. Do not caulk bottom
of fixture backplate to ensure proper moisture
drainage.
Your fixture is now assembled and ready to use. Enjoy!
Figure 9
Mounting Ball
Figure 10
Exterior
Grade Caulk
Outdoor
Fixture
Backplate
Exterior Wall Surface
Thank you for purchasinga Quoizel product.
Need assistance with partsor assembly? Call Quoizelcustomer service at 1-631-273-2700
2012 Quoizel Inc. May2012
or visit us on-lineat www.quoizel.com
6of6
Loading...