Quoizel KY8801IB User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS KY8801: STYLE NUMBER KY8801IB:
PACKAGE CONTENTS
Part
Crossbar
A
B
Green Ground Screw
C
Mounting Screws
Lock Washer
D
Hex Nut
E
Mounting Ball
F
Shade
G
Fixture Body
H
WARNINGS AND CAUTIONS
!
WARNING:
● Before beginning the in stal la tion, turn off electricity at the circuit b reaker box or the main fuse b ox by
switching off the circuit breaker or removing the fuse.
Description
Quantity
1pc
1pc
2pcs
2pcs
2pcs
2pcs
1pc
1pc
Revised 2009-09-24
A
G
B
C
D
E
F
H
CAUTIONS:
● These in structions are provided for your safety. It is very important that t hey are read completely before
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from t he power source before replacing the bulb(s), ma king sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
PREPARATION
Before beginning installation of product, make sure all parts are present. Compare parts with package
●
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Asse mbly Time: 15 30 minutes
● Tools Required for Assembly(not included): Flathead Screwdriver Phillips Screwdriver, Pliers ,
Electrical Tape, Wire Cutters, Safety Glasses & 1, 75 Watt, Type - A Medium Base Bulb.
● Helpful Tools(not i nc lude d): Wire Strippers.
ASSEMBLY INSTRUCTIONS
STEP 1:
a Screw the Mounting Screws into the Crossbar place the
. ,
Lock Washers over the Mounting Screws and thread the
Hex Nuts onto the Mounting Screws as shown Secure the
position of the Mounting Screws by tightening the Hex Nuts
against the Crossbar
b Secure the Crossbar to the Outlet Box with Outlet Box
.
Screws
.
.
-
,
Mounting Screw
Crossbar
Hex Nut
.
Lock Washer
1 OF 2
Outlet Box
Outlet Box Screw
ASSEMBLY INSTRUCTIONS
STEP 2:
* ( )
Use Wire Connectors not supplied to connect the
.
wires
.
a Connect the House Ground Wire to the Fixture Ground
Wire.
. ( )
b Connect the House White or Ribbed Wire to the
Fixture Supply Wire White or Ribbed Side .
. ( )
c Connect the House Black or Red Wire to the Fixture
Supply Wire Black or Smooth Side
.
d Wrap each connection with approved electrical tape and
( ).
( )
carefully stuff all of the connected wires into the Outlet
.
Box
STEP 3 :
a Place Backplate onto Outlet Box aligning 2 holes in the
.
Backplate with 2 Mounting screws threaded on the
Crossbar and secure it against wall with Mounting Balls
STYLE NUMBER KY8801IB:
WHITE OR RIBBED
FROM HOUSE
BLACK OR RED WIRE( )
FROM HOUSE
GROUND WIRE GROUND WIRE
FROM HOUSE FROM FIXTURE
Backplate
.
WHITE OR RIBBED
FROM FIXTURE
BLACK OR SMOOTH
FROM FIXTURE
Crossbar
Mounting Screw
STEP 4 :
a Place the Shade setting inside of the Shade Holder as
.
shown
.
Mounting Ball
Shade
Shade
Holder
STEP 5 :
a Install the correct bulb referring to fixture markings and or labels for maximum wattage. / .
. . .Your installation is completed now Restore electricity Retain this sheet for future reference
2 OF 2
Loading...