Page 1
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-KY5009IN
For Style KY5009IN
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
ToolsRequired:Flatheadscrewdriver,Phillips screwdriver,pliers,wirecutters,wire
strippers,electricaltape,safetyglasses.
BulbRecommended: (9) Medium Base 100W Maximum
EstimatedAssemblyTime:35-40 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Package Contents
Part
A Crossbar
B
C
D
E
F
G
H
I
J
K
L
M
N
Description
Mounting Screw
Nipple
Lock Washer
Hex Nut
Ceiling Canopy
Canopy Chain Loop
Canopy Lock Ring
Tuck Washer
Fixture Chain
Quick Link
Fixture Loop
Shade
Fixture Assembly
Quantity
1pc.
2 pcs.
1pc.
2 pcs.
2 pcs.
1pc.
1pc.
1pc.
1pc.
1pc.
2 pcs.
1pc.
9 pcs.
1pc.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
March 2012
1of8
Page 2
KY5009IN
FINISH: IRON GATE
5.5” Dia.
1.5”
NOTE: FOUR LIGHTS SHOWN FOR
ILLUSTRATION PURPOSES ONLY.
4
Overall Height 136.5”
(Includes 96” Chain)
2
1
3
4.5” Dia.
34.5”
8”
(9)100W Medium
Base Bulbs
(Not Supplied)
PART NUMBER
NO.
1
2
3
4
15009INKY
9561KIT
G3325SH
M2354CHIN
35” Dia.
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE KY5009IN
MOUNTING HARDWARE/CANOPY IRON GATE 5.5"D
SHADE WHITE ONYX 4.5"D X 8"H
SQUARE CHAIN IRON GATE 6MM X 4’
2of8
REQ.
1
1
9
1
Page 3
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-KY5009IN
For Style KY5009IN
STEP 1 - Attach Fixture Loop to Fixture
Assembly
A. Thread the Fixture Loop (L) on to the Nipple on the top
of Fixture Assembly (N). Tighten until snug.
STEP 2 - Attach Nipple to Crossbar
A. Thread one Hex Nut (E) onto top end of the Nipple C .
B. Place one Lock Washer D over the top end of the
Nipple C and then thread the Nipple C into the center
hole of the Crossbar A . Hand tighten until snug.
C. Using pliers, thread the Hex Nut against the
Crossbar A and hand tighten until snug.
() ()
()
()
()
(E)
()
Figure 1
Fixture Loop
Nipple
Fixture
Assembly
Crossbar
Lock Washer
Hex Nut
STEP 3 Attach Crossbar to Outlet Box-
A. Drill a 5/8” diameter clearance hole on the top inside
center of the Outlet Box and through the Structural
Support Member.
B. Place Crossbar (A) onto the Outlet Box and line up
Mounting Holes with a set of holes on Crossbar (A).
C. Thread Outlet Box Screws into the Mounting Holes on
the Outlet Box and tighten until snug to secure the
Crossbar.
D. Using a screwdriver, thread Mounting Screws (B) into
the Structural or Bridging Member and tighten until
snug.
Nipple
Figure 2
Structural or
Bridging Member
Drill a
5/8” Dia.
Hole
Outlet Box
Crossbar
Outlet Box
Screw (not
Supplied)
Figure 3
Mounting Screw
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
3of8
March 2012
Page 4
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-KY5009IN
For Style KY5009IN
STEP 4 - Attach Canopy Chain Loop to Nipple
A. Thread another Hex Nut (E) onto the end of the Nipple
(C).
B. Place the Lock Washer (D) over the end of the Nipple
(C) and then thread the Canopy Chain Loop (G) onto
the end of the Nipple (C).
C. Using pliers, thread the Hex Nut (E) against the Canopy
Chain Loop (G) and hand tighten until snug.
STEP 5 - Assemble Ceiling Canopy
A. F
Push the Ceiling Canopy ( ) upward over the Outlet
Box. Thread the Canopy Lock Ring ( ) onto the Canopy
Chain Loop ( ) and tighten until snug to secure the
Ceiling Canopy ( ).
G
F
H
Outlet Box
Ceiling
Line
Lock Washer
Canopy
Chain Loop
Ceiling Line
Crossbar
Nipple
Hex Nut
Figure 4
Outlet Box
Canopy Chian Loop
Ceiling Canopy
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Canopy
Lock Ring
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
4of8
Figure 5
March 2012
Page 5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-KY5009IN
For Style KY5009IN
STEP 6 Attach Fixture Chain to Canopy
-
Chain Loop and Fixture Loop
A. Adjust the Fixture Chain (J) to your desired length by
removing the links if needed. You may need to use
plier to open the chain links. If so, put a cloth over the
chain to protect the finish from the pliers.
B. Attach one end of the Fixture Chain (J) onto the
Canopy Chain Loop (G) with a Quick Link (K) and then
attach the other end of the Fixture Chain (J) onto the
Fixture Loop on the top of the fixture with another
Quick Link (K).
Quick Link
Fixture Loop
Canopy Chain Loop
Quick Link
Fixture Chain
Safety Cable
Supply Wire and
Ground Wire
Figure 6
STEP 7 Pass Supply Wires through Fixture
-
Chain
A. Pull the Supply Wires, Ground Wire and Safety Cable
up through the Fixture Chain (J) alternating links. Push
the wires and Safety Cable up through the Canopy
Chain Loop (G) into the outlet box.
Canopy
Chain Loop
Fixture Chain
Safety Cable
Supply Wire
and Ground
Wire
Figure 7
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
5of8
March 2012
Page 6
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-KY5009IN
For Style KY5009IN
STEP 8 Install- Safety Cable
A. Un-thread the Canopy Lock Ring (H) and slide Canopy Lock
Ring (H) and Ceiling Canopy (F) down the Fixture Chain (J).
B. Push all slack Safety Cable through Canopy Chain Loop (G),
Nipple (C) and Outlet Box.
C. Pull all of the Safety Cable up through the Center Hole of the
Tuck Washer (I).
D. Push the Cable down through the 12 O’clock Hole. Leaving
½”of slack.
E. Push the Cable up through the 1 O’clock Hole and tuck it
under the cable between the Center Hole and the 12 O’clock
Hole.
F. Pull all of excess cable through all of the holes until the Tuck
Washer is very close to the Structural or Bridging Member.
Remove as much slack as possible out of the Tuck Washer.
About ½”of slack between Tuck Washer and the hole is
acceptable.
12 O clock
Safety
Cable
Hole
'
1 O clock Hole'
12
1
Safety
Cable
Structural or
Bridging Member
Tuck Washer
Outlet Box
Ceiling Line
Canopy Chain Loop
Ceiling
Canopy
Canopy Lock Ring
Fixture Chain
Center Hole
Tuck Washer
Figure 9
Figure 8
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
6of8
March 2012
Page 7
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-KY5009IN
For Style KY5009IN
STEP 9 - Make Wire Connections
A. Push all slack fixture wire through Canopy Chain Loop
(G) into Outlet Box. Trim excess fixture wire leaving a
minimum of 6 inch. Hanging out of the Outlet Box.
B. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
C. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
D. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
E. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
F. Twist connectors until wires are tightly joined together.
G. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
H. Re-attach the Ceiling Canopy (F) as shown in Step 5.
White wire from supply White wire from fixture
Supply Wire
and Ground
Wire from
Outlet Box
Ceiling
Line
Supply Wire and
Ground Wire
Canopy Chain Loop
Ceiling
Canopy
Canopy Lock Ring
Fixture Chain
Black wire from supply
(or Red)
Ground wire from supply Ground wire from fixture
Black wire from fixture
Figure 11
STEP 10 - Attach Shade to Fixture Body
A. Place the Shade (M) setting inside of the Shade Holder
as shown.
Figure 10
Shade
Shade Holder
Figure 12
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
7of8
March 2012
Page 8
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
Assembly Instruction Sheet #IS-KY5009IN
For Style KY5009IN
STEP 11 - Install Bulb
A. standard bulb with a medium screw
This fixture uses
base 100
. Maximum watts.
B. Insert bulb and screw snugly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Bulb
Socket
Figure 13
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
2012 Quoizel Inc.
Thank you for purchasing a Quoizel product.
or visit us on-line at www.quoizel.com
8of8
March 2012
Loading...