Quoizel KY433IB User Manual

Assembly Instruction Sheet #IS-KY433IB

For Style KY433IB

Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445

Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com

ToolsRequired: Flatheadscrewdriver, Phillipsscrewdriver,pliers,wire cutters, wire strippers, electricaltape, safetyglasses.

BulbRecommended: EstimatedAssembly Time: Preparation:

belowto be sure all partsarepresent. If any parts aremissing or damaged, do not attemptto assemble, install, or operatethe fixture. Contact customer serviceforreplacement parts.

Identifyand inspect all parts beforebeginninginstallation. Check package content listand diagrams

(4)Medium Base 100W bulbs Maximum,Alternate bulb (4) 23WCFLMaximum.

20-30minutes

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result.

Package Contents

Crossbar

Lock Washer

Hex Nut

Nipple

STEP 1 Install Fixture Chains-

A. Adjust the Fixture Chain (GG) to your

desired length by removing the links if needed.

Pliers is required for this step.

B. With the Fixture Chain (GG) not

attached to the fixture loop and the Canopy Chain Loop, pull the supply wires with ground wire through the Fixture Chain (GG) alternating links. After the wires are through the Fixture Chain (GG), pull the Supply Wires and Ground Wire through the Ceiling Canopy (HH).

C. Attach one ends of the Fixture Chains

(GG) to the fixture loop on the top end of the Fixture Body (B) with two Quick

Shade

Fixture Body

Hardware Contents

Mounting Ball

Quick Link

x4 Fixture Chain

Ceiling Canopy

Figure 1

Ceiling Loop

Supply Wires and Ground Wire

Links (FF) as shown. Lift the fixture and Fixture Chains (GG) up and attach the other ends of the Fixture Chains (GG) onto the Canopy Chain Loop underside of the Ceiling Canopy (HH) with the rest two Quick Links (FF).

Suggested rods and chain length for Ceiling height : 8’ ceiling : use (9) links of chain and 2 quick links 9’ ceiling : use (19) links of chain and 2 quick links 10’ ceiling : use (29) links of chain and 2 quick links

STEP 2 Install Crossbar-

A. AA)Attach the Crossbar ( to the Outlet Box with the head of the

Green Ground Screw facing you. Secure it with Outlet Box Screws (not included) Tighten until snug..

Outlet Box

Figure 2

Green Ground Screw

STEP 3 Install Nipple to Crossbar-

* Pliers is required for this step.

A. Thread one Hex Nut (CC) to the

middle of the Nipple (DD). Place the Lock Washer (BB) over the Nipple (DD) and then thread the Nipple (DD) into the Crossbar (AA) until the Nipple (DD) is about

0.375” above the Crossbar (AA).

B. Remove the Ceiling Canopy (HH)

and then tighten the Hex Nut (CC) against the Crossbar (AA) to secure in place.

C. Thread another Hex Nut (CC) onto

the end of the Nipple (DD). Thread this Hex Nut (CC) on just enough so the inside surface of the Ceiling Canopy (HH) rests against it. * You may have to trial fit the Ceiling Canopy (HH) one more times to insure this distance also. This Hex Nut (CC) is needed here to prevent you from crushing down the center of the Ceiling Canopy (HH).

Outlet Box Screw (not included)

Figure 3

Step A

2014 QuoizelInc.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

Thank you for purchasing a Quoizel product.

or visit us on-line at www.quoizel.com

1of3

August2014

STEP 4 - Attach Lanyard

STEP 6 Install Ceiling Canopy to Crossbar-

A. The purpose of the lanyard is to provide the installer a means to

support the fixture from the junction box while connecting the electrical wires. This enables the fixture to hang from the junction box and your hands are free to make the wire connections.

B. Turn the Button Stop so it may be inserted into the Inner Backplate

slot. Make sure the Button Stop is completely inside the Inner Backplate. Slowly release the fixture to make sure it is supported by the Button Stop. Proceed to the wiring steps in the next step. Once you are complete with the wiring there is nothing to do with Lanyard. The Lanyard will push into the junction box when the fixture is placed for final mounting.

Crossbar

Figure 4

STEP 5 - Wire Connections

A. Use standard wire connectors (not included) to make all wire

connections. (Connectors are not included with fixture.) Strip and prepare wire ends according to instructions supplied with connectors.

B. Connect White Supply Wire from the Outlet Box to Ribbed side Wire

from fixture.

C. Connect Black (or Red) Supply Wire from the Outlet Box to Smooth

side Wire from fixture.

D. Connect Ground Wire from the Outlet Box to Ground Wire from

fixture. E. Twist connectors until wires are tightly joined together. F. Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into the Outlet Box.

Slot

Button Stop

Lanyard

A. Attach the Ceiling Canopy (HH) over the end of the Nipple (DD) and

secure with the Hex Nut (CC). Hand tighten until snug.

B. Thread the Finial (EE) onto the Nipple (DD) and hand tighten until

snug.

STEP 7 - Install Bulb

A. This fixture uses standard bulb with medium

base. Maximum 100 watts.

B. Insert bulb and screw snugly into place.

Figure 7

STEP 8 - Install Shade

A. Place the Shade (A) into the Shade Holder.

Your fixture is now assembled and ready to use. Enjoy!

Figure 6

Bulb

White wire

from supply

Black wire from supply (or Red)

Ground wire

from supply

Figure 5

Ribbed side wire from fixture

Smooth side wire from fixture

Ground wire from fixture

Figure 8

Shade Holder

2014 QuoizelInc.

Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700

Thank you for purchasing a Quoizel product.

or visit us on-line at www.quoizel.com

2of3

August2014

+ 1 hidden pages