6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
..
,.
INSTRUCTION SHEET IS-KY1404
STYLE NUMBER: KY1404IB
PACKAGE CONTENTS
PART
A Crossbar
B
C
D
E
F
G
H
I
J
DESCRIPTION
Green Ground Screw
Hex Nut
Nipple
Lock Washer
Lock Ball
Shade
Socket Collar
Socket Collar Tool
Fixture Body
QUANTITY
1pc
1pc
3pcs
1pc
1pc
1pc
4pcs
4pcs
1pc
1pc
ISSUED 06-2010 REVISED 2010-09-29
A
B
C
D
E
F
J
G
H
I
WARNINGS AND CAUTIONS
WARNING:
● Before beginning the installation, turn off electricity at the circuit breaker box or the main fuse box by switching
off the circuit breaker or removing the fuse.
CAUTION:
● These instructions are provided for your safety. It is very important that they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Disconnect fixture from the power source before replacing the bulb(s), making sure that bulb9s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
PREPARATION
● Before beginning installation of product, make sure all parts are present. Compare parts with package contents
list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement part.
● Estimated Assembly Time: 30 - 45 minutes
● Tool Required for Assembly (not included): Flathead screwdriver, Phillips screwdriver, Pliers, Electrical tape,
Wire cutter, Safety glasses and (4) 100W A19 medium base bulbs
● Helpful Tools (not included): Wire strippers.
.
1OF4
INSTALLATION INSTRUCTIONS
STEP 1:
a. Secure the Crossbar onto the Outlet Box with Outlet
Box Screws. Tighten until snug.
STEP 2:
a. Thread one Hex Nut onto top end of the Nipple.
b. Place one Lock Washer over the top end of the Nipple
and then thread the Nipple into the center lock hole of
the Crossbar.
c. Using pliers, thread the Hex Nut against the Crossbar
and hand-tighten until snug.
Crossbar
STYLE NUMBER: KY1404IB
Outlet Box
Crossbar
Outlet Box
Screw
Lock Washer
Hex Nut
Nipple
STEP 3:
a. Locate the Ceiling Canopy onto the Crossbar and slip
the Button Stop on the end of the Lanyard into the Slot
on the Crossbar as shown.
Ceiling
Canopy
Slot
Crossbar
Button Stop
Lanyard
2OF4