Quoizel KD8701MM User Manual
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
. .
, .
INSTRUCTION SHEET IS KD8701STYLE NUMBER KD8701MM:
PACKAGE CONTENTS
Part
A
Crossbar
B
Green Ground Screw
Mounting Screw
C
D
Lock Washer
E
Hex Nut (for Mounting Screw)
Mounting Ball
F
G
Shade
H
Candle Cover
Crystal Pendant
I
Fixture Body
J
!
WARNINGS AND CAUTIONS
Description
Quantity
1pc
1pc
2pcs
2pcs
2pcs
2pcs
1pc
1pc
1pc
1pc
ISSUED 07-2008
A
B
C
D
E
F
Revised 2009-03-12
G
H
WARNING:
● Befo re beginning the in stal la tion, tu rn off el ectricity at th e circuit breaker box or the ma in fuse box by
switching off the circuit breaker or removing the fuse.
CAUTIONS:
● These instructions are provided for your safe ty. It is very i mportant t hat they are read completely before the
installation of your fixture. We strongly recommend that a professional electrician install the fixture.
● Di sconnect fixture from t he power source before replacing t he bulb(s), ma king sure the bulb(s) had sufficient
time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may result.
I
J
PREPARATION
● Befo re beginning in st allation of prod uct, make sure a ll parts are present. Comp ar e parts with p ac kage
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
● Estimated Assembly Time : 10 20 minutes
● Tools R equi red for Assembly (not included): Flath ea d s crew driver Phillips screwdriver, pliers, electrical
tape, wire cutters, safety glasses &1, 60 Watt, Type B Candelabra Base Bulb.
,
-
● He lp ful Tools (not included): Wire Strippers.
INSTALLATION INSTRUCTIONS
STEP 1:
a Screw the Mounting Screws into the Crossbar
. ,
place the Lock Washers over the Mounting Screws
and thread the Hex Nuts onto the Mounting Screws
as shown Secure the position of the Mounting
Screws by tightening the Hex Nuts against the
Crossbar
b Secure the Crossbar to the Outlet Box with Outlet
.
Box Screws
.
.
.
Outlet Box
Mounting Screw
Crossbar
Lock Washer
Outlet Box Screw
Hex Nut
1 OF 2
INSTALLATION INSTRUCTIONS
STEP 2:
* ( )
Use Wire Connectors not supplied to connect
the wires
.
a Connect the House Ground Wire to the Fixture
.
Ground Wire.
.
b Connect the House White Wire to the Fixture
Supply Wire White or Ribbed Side .
. ( )
c Connect the House Black or Red Wire to the
Fixture Supply Wire Black or Smooth Side
.
d Wrap each connection with approved electrical
( )
( ).
tape and carefully stuff all of the connected wires
into the Outlet Box
.
STEP 3:
a. Place the Backplate over the Mounting Screws and
secure with Mounting Balls. Hand tighten until
snug.
WHITE WIRE
FROM HOUSE
BLACK OR RED WIRE( )
FROM HOUSE
GROUND WIRE
FROM HOUSE
STYLE NUMBER KD8701MM:
WHITE OR RIBBED
FROM FIXTURE
BLACK OR SMOOTH
FROM FIXTURE
GROUND WIRE
FROM FIXTURE
Outlet Box
Mounting Screw
Backplate
Mounting Ball
STEP 4
. .
a Locate Crystal Pendant onto the Hanger
.
b Place Candle Cover over Socket setting into
the Cup And then place the Harp inside of
:
.
the Shade onto the top end of the Candle
.
Cover
Hanger
Socket
Crystal Pendant
STEP 5:
a. Install the correct Bulb referring to fixture markings and/or labels for maximum wattage.
Shade
Harp
Candle Cover
Cup
Your installation is completed now. Restore electricity. Retain this sheet for future reference.
2 OF 2
Loading...